 |
04-27-2010, 10:23 AM
|
#1
|
|
|
please help, chrono problem
Ok wen I turn the screw under the reg and try to chrono it up the psi goes to high. I want the fps about 275 but the psi down bout 215. The psi just goes to high! Any help please?
|
|
|
04-28-2010, 08:06 PM
|
#2
|
|
|
Quote:
Originally Posted by Hunter-Stroyick
Ok wen I turn the screw under the reg and try to chrono it up the psi goes to high. I want the fps about 275 but the psi down bout 215. The psi just goes to high! Any help please?
|
thats probably not a good idea, the epiphany's range is between 250 & 280
going that low would result in drop off.
|
|
|
04-28-2010, 09:36 PM
|
#3
|
|
El Presidente
Join Date: Apr 2007
Location: Rock Island/Grayslake IL
|
Quote:
Originally Posted by xmikenhx
thats probably not a good idea, the epiphany's range is between 250 & 280
going that low would result in drop off.
|
take out all inserts from the firing can. up your dwell. adjust reg. readjust dwell. profit.
|
|
|
04-30-2010, 07:59 PM
|
#4
|
|
|
ok how many times should i up it?
|
|
|
04-30-2010, 09:58 PM
|
#5
|
|
|
did you get the gun used? because if so and it didnt come with other firing can inserts you might not have the insert needed to get to 275 fps because they had 3 different inserts depending on what fps you wanted i dont know why they did this they thought it was "Smart" and i think it was a horrible idea i use to have an epiphany and only could get that to 230-245fps the only way to get the inserts is to buy the whole epiphany firing can wich im not sure you can even get anymore but if so there around 40$ but im not going to garentee thats it
|
|
|
05-03-2010, 04:39 PM
|
#6
|
|
|
ya i got it used and it had the large one in it. the green, but im going to try it without a insert because people say to do that
|
|
|
05-03-2010, 07:01 PM
|
#7
|
|
|
With a QEV, my Epiphany runs at 270 fps with the pressure at 180ish. I have no insert, and no dropoff problems, but I did have to adjust the dwell to facilitate these settings.
|
|
|
05-03-2010, 08:37 PM
|
#8
|
|
El Presidente
Join Date: Apr 2007
Location: Rock Island/Grayslake IL
|
With the smart parts qev, no insert, and a decent barrel match i can get 270 fps @ 160 psi with reballs.
for dwell instructions go to the stickies, i dont have time to type all that out.
|
|
|
05-04-2010, 06:16 PM
|
#9
|
|
|
ya i dont have a qev..
|
|
|
05-05-2010, 08:06 AM
|
#10
|
|
|
They're like $20 on ebay, or less on the B/S/T here
|
|
|
06-12-2010, 01:43 PM
|
#11
|
|
|
Mine shoots like 280 FPS at around 150-175 PSI
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|