Please help identify this board.

PBJunky54 · 04-23-2010, 09:14 AM

I bought a used UL Frame for my DM5 and it came with a aftermarket board in it. The previous owner said it was a Virtue board but I'm following the instructions for the Redfined board and the UL board for a DM6 and they arent coinciding with the programing lights.

If anyone can help me figure this out I would really appreciate it. I'm supposed to be playing in a tournament on sunday so time is of the essence.

Thank you

**FallNAngel** · 04-23-2010, 09:29 AM

Definitely a stock UL board.

Now as for what *PROGRAMMING* it has, that's another matter entirely. It could've been flashed by Tadao; try this manual: http://www.tadaotechnologies.com/dow..._10_Manual.pdf

Uziel Gal · 04-23-2010, 09:36 AM

Yep, as stated in the DM forum, and by FallN, this definitely appears to be a stock board, and as I stated in the DM forum, and again confirmed by FallN, if it is "aftermarket" in any way, it will most likely have been flashed by Tadao.

If the above manual doesn't help, give us the LED colour sequence in programming mode, and we may be able to tell you what you have.

PBJunky54 · 04-23-2010, 09:40 AM

I don't know the sequence but when you power up in programming mode it flashes Blue once and then through these four colors,

Red, Yellow, Green, Blue

Not necessarily in that order.

If you power up not in programing mode it flashes blue once then goes to Red.

Thank you all for your help.