[notsuoh-alyat]

I have a geo, with the newer bolt kit in.

Im almost sure it's because I have a LP Reg on my CP Tank.. it is shooting low.

Im adjusting the bottom of my regulator, in & out without much change.

How should I adjust my dwell to use this tank? Turn it up 2, Down 2. Ive shot timmy's/ego's my whole life haha, just wondering if yall could help.

Appreciate it

[cbomber220]

just get the low pressure reg spring or get a HP tank.

[notsuoh-alyat]

I am broke.

Any idea if I turn my dwell up or down? And it gets real hot here in Houston, will that make my gun shoot like cat piss

[Darthdoug]

Not much you'll be able to do with dwell or anything else. The Geo clearly states it wants HP input on the manual. You can 'make it work' with a LP spring but the best bet is an HP tank/reg. Try to swap one at your local field, LP for HP.

The temp isn't making the difference, it's simply that you have the wrong pressure input to your gun.

[cbomber220]

i've got the LP spring in mine and it works very well, i get no shoot down and it extremely consistent. i only paid 16 bucks for one so its well worth it.

increasing your dwell is only going to lead to horrible efficiency from an already not so efficient marker. i strongly recommend the spring.

[dwhall1]

Buy the spring kit for the CP tank would be your best bet. Then you would have the high pressure required. I would go this route instead of trying the geo spring.

[cbomber220]

Originally Posted by dwhall1

Buy the spring kit for the CP tank would be your best bet. Then you would have the high pressure required. I would go this route instead of trying the geo spring.

or do this. i forgot you could bump up the pressure of the LP CP tanks.

[Speedballer844]

Im actualy suprised you got it to 270 i cant even get mine with mid pressure to go over 250 fps. Just purchase the lp spring or whats most likley smarter is ^ to get the cp conversion kit. thats what i did with my ga tank and works great now

[bmoney003]

the LP spring...is super cheap