Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Closed Thread
 
Thread Tools
Old 12-09-2012, 06:25 PM #1828
jim4130
proud gmax owner!!!
 
jim4130's Avatar
 
Join Date: Jul 2008
Location: woburn MA.
jim4130 plays in the PSP
jim4130 plays in the APPA D4 division
jim4130 is one of the top 250 posters on PbNation
jim4130 is Boss
Stock settings. Eye delay is a set amount of time where the gun will not fire as the eyes read shots. Eye sensitivity is a setting used to adjust the light sensitivity of the eyes so they dont missread. Stock settings should be fine, if you add delay you will slow your cycle rates if you shorten your delay you could cause chopping. Changing the sensitivity could result un chops or misfires. I don't recomend touching either setting unless your experiencing the issues I just stated.
__________________
OBE
SBPB

come check out my gun collection

proud suporter of

shocker owners
jim4130 is online now  
Old Sponsored Links Remove Advertisement
Advertisement
Old 12-10-2012, 01:02 AM #1829
zzANGUISHzz
Bad Luck 13
 
zzANGUISHzz's Avatar
 
Join Date: Nov 2012
Location: Philadelphia, PA
Annual Supporting Member
zzANGUISHzz is playing at Living Legends VII
zzANGUISHzz owns a Planet Eclipse Geo
zzANGUISHzz posts videos on PbNation
zzANGUISHzz supports DLX Technology
zzANGUISHzz supports Empire
Do you know what the stock eye sensitivity setting would be bc my manual doesn't state the default. The eye delay is stated but not the sensitivity.
zzANGUISHzz is offline  
Old 12-10-2012, 04:33 PM #1830
JL1988
 
 
JL1988's Avatar
 
Join Date: Jun 2012
Location: So cal
JL1988 plays in the APPA beginner division
Alright guys...got an issue with my SFT.
Played in a tournament this weekend and the gun was shooting great the first match (5 games) and for the first couple games of the second match. At some point, I broke paint in the breech, which caused my bolt to stick forward. Had to push a swap in to get it pushed back, then it would cycle fine. Took the bolt out, cleaned everything, and went back out. Ended up happening again a few more times throughout the day. Luckily, didn't cost us any games but what could be causing it? I'm not sure if its pressure on the stack (reloader B) braeking a ball as it hits the breech or what is causing the bolt to stick forward at that point?
I have only had the problem with this paint (APX paint). It was more brittle then the regular paint I shoot though..
JL1988 is offline  
Old 12-10-2012, 04:49 PM #1831
americanidiot748
I Sling Monkey Poo!
 
americanidiot748's Avatar
 
Join Date: Feb 2007
Location: Midland, Tx
americanidiot748 has achieved Level 1 in PbNation Pursuit
americanidiot748 has perfected Level 1 in PbNation Pursuit
americanidiot748 has achieved Level 2 in PbNation Pursuit
americanidiot748 has achieved Level 3 in PbNation Pursuit
americanidiot748 is attending Decay of Nations VI
Quote:
Originally Posted by JL1988 View Post
Alright guys...got an issue with my SFT.
Played in a tournament this weekend and the gun was shooting great the first match (5 games) and for the first couple games of the second match. At some point, I broke paint in the breech, which caused my bolt to stick forward. Had to push a swap in to get it pushed back, then it would cycle fine. Took the bolt out, cleaned everything, and went back out. Ended up happening again a few more times throughout the day. Luckily, didn't cost us any games but what could be causing it? I'm not sure if its pressure on the stack (reloader B) braeking a ball as it hits the breech or what is causing the bolt to stick forward at that point?
I have only had the problem with this paint (APX paint). It was more brittle then the regular paint I shoot though..
i dont think the reloader is the problem since they are sound activated they shouldn't put much pressure on the ball stack
__________________
Shocker Owners Club
SBPB <-BAMFs
Smart Parts SFT Shocker (Sunburst Orange with Black accents)
My sexy shocker shooting like a beast, Fastest shocker ever!!!
DO NOT DEAL WITH ATLas Paintball, Atlballerz, Paul Decker!http://www.pbnation.com/showthread.p...5#post78291865
https://www.facebook.com/#!/paul.decker.351
americanidiot748 is offline  
Old 12-10-2012, 05:46 PM #1832
fishballer06
ShockerRepair.com
 
fishballer06's Avatar
 
Join Date: Mar 2005
Location: PA
Annual Supporting Member
fishballer06 is BST Legit
fishballer06 plays in the PSP
fishballer06 donated to help Peyton Trent
fishballer06 supports our troops
fishballer06 supports DLX Technology
Check your detents and your SFT oring.
__________________
fishballer06 is offline  
Old 12-10-2012, 07:07 PM #1833
JL1988
 
 
JL1988's Avatar
 
Join Date: Jun 2012
Location: So cal
JL1988 plays in the APPA beginner division
Quote:
Originally Posted by fishballer06 View Post
Check your detents and your SFT oring.
Just replaced SFT o-ring before the tournament as I had thought about that from the time before I had this issue and I had never replaced it since I bought the gun in '04. I have the newer style Kila Detents, I used to have the older style until they broke and Kila replaced them with the new style (I don't like the new style). I do have them adjusted though so the bolt is able to easily push past them (had to use a thicker oring then provided on the non-vision side). Think detents might be causing the issue? I don't have the external magnet on them either if that makes a difference.
JL1988 is offline  
Old 12-10-2012, 07:43 PM #1834
jim4130
proud gmax owner!!!
 
jim4130's Avatar
 
Join Date: Jul 2008
Location: woburn MA.
jim4130 plays in the PSP
jim4130 plays in the APPA D4 division
jim4130 is one of the top 250 posters on PbNation
jim4130 is Boss
If you took magnets out of your magnetic detents then I think you just answered your own question
__________________
OBE
SBPB

come check out my gun collection

proud suporter of

shocker owners
jim4130 is online now  
Old 12-11-2012, 12:52 PM #1835
JL1988
 
 
JL1988's Avatar
 
Join Date: Jun 2012
Location: So cal
JL1988 plays in the APPA beginner division
Quote:
Originally Posted by jim4130 View Post
If you took magnets out of your magnetic detents then I think you just answered your own question
No, what I meant is..
The old style Kila detents had internal magnets that you could adjust how many were inside.
The new style (what I now have) have an internal magnet that you can NOT adjust but has a magnet you can put on the outside of the body to make the detents push back stronger. I do not have those magnet installed as I do not need them to be stronger.
JL1988 is offline  
Old 12-11-2012, 02:36 PM #1836
tyronejk
titular
 
tyronejk's Avatar
 
Join Date: Jan 2012
Location: Atlanta, GA
tyronejk is an NCPA player
tyronejk plays in the APPA beginner division
Have you cleaned out your solenoid?
__________________
Current markers: 2011 G6R | Axe | Lasoya Promaster | Ion | Ion XE

Theoretical max efficiency of a marker
Automated paintball turret
tyronejk is offline  
Old 12-11-2012, 04:42 PM #1837
JL1988
 
 
JL1988's Avatar
 
Join Date: Jun 2012
Location: So cal
JL1988 plays in the APPA beginner division
Quote:
Originally Posted by tyronejk View Post
Have you cleaned out your solenoid?
Solenoid was cleaned probably 5-6 cases ago.
JL1988 is offline  
Old 12-12-2012, 07:12 PM #1838
fsrxc1
 
 
fsrxc1's Avatar
 
Join Date: May 2004
Location: mass
 has been a member for 10 years
So i got 2 shockers and the kid screwed me...I got a freeflow and regular sft...Sft pisses air out of the grip frame...already changed the sail oring...whats the next step...The kid swears it didnt leak before he sent it to me...i didnt realize shipping a gun could cause a leak (yes sarcasm)
__________________
www.destructivecustoms.com
For all your AKA service and milling needs. Fully Authorized in the repair of Viking, Excalibur, and Merlin Markers.
mark@destructivecustoms.com

Rampage X-Ball
Monster Paintball- I Bleed GREEN
fsrxc1 is online now  
Old 12-12-2012, 07:33 PM #1839
bcrguy
F**k S**t Up...
 
bcrguy's Avatar
 
Join Date: Apr 2010
Location: Ontario, Canada
bcrguy is playing at Living Legends VI
bcrguy owns a Planet Eclipse Ego
Quote:
Originally Posted by fsrxc1 View Post
So i got 2 shockers and the kid screwed me...I got a freeflow and regular sft...Sft pisses air out of the grip frame...already changed the sail oring...whats the next step...The kid swears it didnt leak before he sent it to me...i didnt realize shipping a gun could cause a leak (yes sarcasm)
Check can o-rings as well as the front guide o-ring.
__________________
Ego11, SFT Shocker, Quest, Threshold
Spire, Rotor, Ninja 77/45 and 68/45, Dye i4's,
Citrus Connection #88
bcrguy is offline  
Old 12-12-2012, 07:40 PM #1840
Apollo918
Proud 'Fossil' Owner
 
Apollo918's Avatar
 
Join Date: Oct 2005
Location: 502
Apollo918 plays in the PSP
Apollo918 owns a Planet Eclipse Geo
Apollo918 supports Team VICIOUS
Apollo918 plays in the APPA D4 division
Quote:
Originally Posted by fsrxc1
So i got 2 shockers and the kid screwed me...I got a freeflow and regular sft...Sft pisses air out of the grip frame...already changed the sail oring...whats the next step...The kid swears it didnt leak before he sent it to me...i didnt realize shipping a gun could cause a leak (yes sarcasm)
If you checked bolt sail oring, you should check the manifold orings. Make sure they are all there. And the manifold is screwed down. Check your inserts to make sure they are aligned correctly.
__________________
"He who fights with monsters should look to it that he himself does not become a monster... when you gaze into the abyss, the abyss also gazes into you"-Fredrich Nietzche
Apollo918 is offline  
Old 12-12-2012, 08:26 PM #1841
fsrxc1
 
 
fsrxc1's Avatar
 
Join Date: May 2004
Location: mass
 has been a member for 10 years
I also swapped in the bolt from the freeflow...same thing...I am taking to Jim4130's house on friday...it is def from the noid
__________________
www.destructivecustoms.com
For all your AKA service and milling needs. Fully Authorized in the repair of Viking, Excalibur, and Merlin Markers.
mark@destructivecustoms.com

Rampage X-Ball
Monster Paintball- I Bleed GREEN
fsrxc1 is online now  
Old 12-12-2012, 08:28 PM #1842
szpaintballer
 
 
szpaintballer's Avatar
 
Join Date: Jul 2011
Location: Sebastopol,ca
szpaintballer supports Team VICIOUS
szpaintballer posts videos on PbNation
szpaintballer is Legendary
szpaintballer supports DLX Technology
What kind of bolt is this?
Thanks in advance

image-1386295730.jpg
szpaintballer is offline  
Old 12-12-2012, 08:32 PM #1843
jim4130
proud gmax owner!!!
 
jim4130's Avatar
 
Join Date: Jul 2008
Location: woburn MA.
jim4130 plays in the PSP
jim4130 plays in the APPA D4 division
jim4130 is one of the top 250 posters on PbNation
jim4130 is Boss
Quote:
Originally Posted by fsrxc1 View Post
I also swapped in the bolt from the freeflow...same thing...I am taking to Jim4130's house on friday...it is def from the noid

Quote:
Originally Posted by szpaintballer View Post
What kind of bolt is this?
Thanks in advance

Attachment 55738
Sprung HE
__________________
OBE
SBPB

come check out my gun collection

proud suporter of

shocker owners
jim4130 is online now  
Old 12-12-2012, 08:58 PM #1844
inmylife2415
SBPB
 
inmylife2415's Avatar
 
Join Date: Jan 2008
Location: Madison
inmylife2415 supports DLX Technology
Quote:
Originally Posted by fsrxc1 View Post
So i got 2 shockers and the kid screwed me...I got a freeflow and regular sft...Sft pisses air out of the grip frame...already changed the sail oring...whats the next step...The kid swears it didnt leak before he sent it to me...i didnt realize shipping a gun could cause a leak (yes sarcasm)
Does this mean DC will soon offer shocker milling
inmylife2415 is offline  
Old 12-12-2012, 09:05 PM #1845
fsrxc1
 
 
fsrxc1's Avatar
 
Join Date: May 2004
Location: mass
 has been a member for 10 years
Not even in the least...Jared isn't very happy that i got these
__________________
www.destructivecustoms.com
For all your AKA service and milling needs. Fully Authorized in the repair of Viking, Excalibur, and Merlin Markers.
mark@destructivecustoms.com

Rampage X-Ball
Monster Paintball- I Bleed GREEN
fsrxc1 is online now  
Old 12-12-2012, 09:28 PM #1846
inmylife2415
SBPB
 
inmylife2415's Avatar
 
Join Date: Jan 2008
Location: Madison
inmylife2415 supports DLX Technology
lol, that's too bad
inmylife2415 is offline  
Old 12-13-2012, 12:18 AM #1847
tyronejk
titular
 
tyronejk's Avatar
 
Join Date: Jan 2012
Location: Atlanta, GA
tyronejk is an NCPA player
tyronejk plays in the APPA beginner division
Quote:
Originally Posted by JL1988 View Post
Solenoid was cleaned probably 5-6 cases ago.
Try cleaning that out again. You could have some gunk in there.
__________________
Current markers: 2011 G6R | Axe | Lasoya Promaster | Ion | Ion XE

Theoretical max efficiency of a marker
Automated paintball turret
tyronejk is offline  
Old 12-13-2012, 11:00 AM #1848
JL1988
 
 
JL1988's Avatar
 
Join Date: Jun 2012
Location: So cal
JL1988 plays in the APPA beginner division
Quote:
Originally Posted by tyronejk View Post
Try cleaning that out again. You could have some gunk in there.
Always worth a shot.
JL1988 is offline  
Closed Thread


Thread Tools

Posting Rules
Forum Jump