Originally Posted by sullyvan
So my shocker will air up, no leaks and when i go to shoot the bolt doesnt move but the noid makes the sound like its shooting like you hear the burst of air just not the burst of air you get when it fires a paintball.
There are a few things that could account for this.
The first things that I would suggest, are a fresh quality battery, increasing your dwell, changing your bolt sail o-ring, and maybe increasing your reg pressure if it is currently set very low. Basically, set the pressure within the recommended limits, and that should be good. Once you have the marker working, you can then fine tune the velocity from there.
On a more generic note, check the bolt moves smoothly, and that there are no swollen or worn o-rings. Hard to be specific, but try not to over or under grease the bolt assembly. Some grease being visible on the o-rings is fine, but don't cake it on there.
If those things don't resolve your problem, post back up, and we can go through some more obscure causes.
Originally Posted by Zepulkinator
Is an adjustable manifold for a shocker just like the feather touch manifold for the Luxe? If not, what is the difference?
I must admit that I am not entirely familiar with the Luxe - I've not torn one down to look at the manifold - but from what I have heard, yes, the adjustable manifold for a Shocker would have the same effect.
Exactly what I was going to link to.