[Tweeter1388]

I got the dynasty board in my shocker and I cant figure out for the life of me how to get it off of semi and to 12.5 bps HELP

[Umami]

Originally Posted by Tyson54321

Fixed, needed new battery, another question, when i have psp ramping on, i shoot fast, let go of my trigger, but it still keep's shooting?, would this just be the trigger adjustment?

if its just a few shots (~3) that's just the way PSP ramping works.

[Tyson54321]

no i mean it keeps shooting lol...?

[Uziel Gal]

Originally Posted by Tweeter1388

I got the dynasty board in my shocker and I cant figure out for the life of me how to get it off of semi and to 12.5 bps HELP

Do you know what version of the Dynasty board you have?

Originally Posted by Tyson54321

no i mean it keeps shooting lol...?

Yep, your trigger pull is probably set too short and/or too light, so you are getting trigger bounce.

[lankmastaflex]

I replaced the piston neck oring, but my shocker reg still continues to leak. any other ideas?

[Uziel Gal]

In that case, try the piston head o-ring.

[killajay2014]

Quick question being that I'm not home to messure...what's the stock length of a sft barrel? 12 or 14?

[Umami]

Aww, c'mon man, you know this.

http://www.zdspb.com/tech/mguide/sho...roduction.html

It's 14".

[killajay2014]

I know I feel stupid...I had a quick stop to my brain and couldn't remember

[lankmastaflex]

I replaced every oring in the reg and it still leaks.

[nazab]

Located between the adapter and body is a 14/70 o-ring, which seals the air pressure passing through the ports in the adapter. [zdspb.com]

question:is this the screw that i need to adjust for the air pressure?
180-150

[Tyson54321]

Before i mess up things, i played today, in the middle my nxt shocker was being stupid, this is problem : virtue lazer eyes, virtue board,: no ball in breach ' (it says there is one) & then i put a ball in breach it says there isn't once ??

[Uziel Gal]

Sounds like your board is set to reflective eye logic, when it should be set to breakbeam.

[Tyson54321]

fixed, thank's again, guy's, not a shocker expert yet

[desacato102]

Hey, I'm having a bit of a problem with my used and abused RL NXT shocker and the problem that's making me lose patience is the on/off button on the frame. It just stick, the magnet's aren't repelling OR are getting attracted my the metal piece. Should I try my luck, first, buying a new screw kit(it really needs it) or send it to smart parts this week? I bought it from a friend last night.

[Uziel Gal]

I wouldn't send it to Smart Parts - your marker would most likely get sent back to you as undeliverable.

Remove the switch and make sure it hasn't got covered with paint and dirt, and make sure that there are no wires getting in the way of it's movement.

[bandit_kb]

The gun will fire the first shot with the eyes on, but it won't shoot after that. The gun works fine with the eyes off. Possible causes?

[Uziel Gal]

Eyes are dirty or damaged, screw damage to the upper board, loose wires in the harness, bent pins in the harness sockets, eye ribbon plugged in upside down. Basically, for one reason or another, the eyes aren't reading the ball in the breech.

If the marker fires when there isn't a ball in the breech, but won't fire when there is, then the eye logic is set incorrectly on the board.

[bandit_kb]

Originally Posted by Uziel Gal

Eyes are dirty or damaged, screw damage to the upper board, loose wires in the harness, bent pins in the harness sockets, eye ribbon plugged in upside down. Basically, for one reason or another, the eyes aren't reading the ball in the breech.

If the marker fires when there isn't a ball in the breech, but won't fire when there is, then the eye logic is set incorrectly on the board.

The board is in good condition and the harness and pins look good as well. I will try to reclean and thoroughly inspect the eyes to see if that is the case.

[Yellowone (Banned)]

New to shockers so please forgive me if this has been answered or is a normal problem.

Gun - Nxt Shocker
Board - Virtue redefined board
Dwell - 14ms
Pressure - ~200
ABS - 15...stock on the board is 10..So I just put it at 15
Battery - New

Problem is im getting some drop off if I stop shooting for like 10-15 seconds. It was doing this really bad but after putting a new battery it just does this like once or twice after if i stop shooting then continue to shoot. Should I up the dwell?

[Uziel Gal]

With an NXT, you most likely have a Parker solenoid, in which case 14ms is probably enough, particularly with the additional ABS dwell on top. As such I'm inclined to think that you probably need to look at your o-rings, make sure there aren't any swollen ones, and perhaps try a selection of o-rings on the bolt until you find a combination that allows the bolt to slide more easily, while still maintaining a seal. You might also want to look in to trying some different greases, in different amounts, to see if that helps.