Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 04-09-2010, 12:06 PM #1
Cockergeek99
Budget baller
 
Cockergeek99's Avatar
 
Join Date: Mar 2010
Location: Planet Earth (duh)
Cockergeek99 is playing at Living Legends III
Cockergeek99 supports Team VICIOUS
Cockergeek99 is for the Gunfight
Airsoft shell on SLG?

Do you know if it would be possible to mod an SLG by putting an airsoft shell on the body?
__________________
Christ Krew

94% of people stink at basic math. Copy and paste this into your sig if you are part of the 8% that doesn't.

Copy and paste this into your signature if you use Linux.
Cockergeek99 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 04-09-2010, 12:28 PM #2
Tikiman12
 
 
Tikiman12's Avatar
 
Join Date: Jan 2008
Location: Texas
you mean like the way the ion guys will make mp90's?

I've thought about this and the ion is the easiest market to use in pieces. the SLG needs the frame, or atleast the noid to trip the sear. SO you'd have to make sure everything you look out of the SLG was still touching.

With the ion, the can breech and bolt can sit seperatly as long as the air hose that goes to the banjo is long enough to reach it.

am I making since or confusing you? lol
__________________
SLG short bolt (roll back Issue)
http://www.pbnation.com/showthread.p...8#post55001008
TIKIMAN12 Feedback:
http://www.pbnation.com/feedback.php?u=381989
Ebay feedback:
http://myworld.ebay.com/tikiman121086/
Tikiman12 is offline   Reply With Quote
Old 04-09-2010, 07:43 PM #3
Cockergeek99
Budget baller
 
Cockergeek99's Avatar
 
Join Date: Mar 2010
Location: Planet Earth (duh)
Cockergeek99 is playing at Living Legends III
Cockergeek99 supports Team VICIOUS
Cockergeek99 is for the Gunfight
Kinda confusing...
__________________
Christ Krew

94% of people stink at basic math. Copy and paste this into your sig if you are part of the 8% that doesn't.

Copy and paste this into your signature if you use Linux.
Cockergeek99 is offline   Reply With Quote
Old 04-10-2010, 09:27 PM #4
The Inflicted
.detcilfnI ehT
 
The Inflicted's Avatar
 
Join Date: Jan 2002
Location: Chattanooga, TN
If you're just going to encase the gun, body, frame, reg, and all, in a plastic airsoft body, then no, there wouldn't be any problem.

Go for it. Sounds like a fun project.
The Inflicted is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump