SP1 Leak only when trying to achieve over 260 fps

FearNaught · 07-05-2011, 07:23 PM

Basically the title says it but to elaborate, i have an sp1 with a blackheart board and i cleaned the regulator and cleaned the gun and put in a new battery but when i try to increase the regulator up above about 260 to 270 fps the gun leaks from the solenoid like its blown.

RaymiusII · 07-10-2011, 06:19 PM

check the hoses. I would guess it is leaking from the hose and not the solenoid becasue a broken solenoid leaks all the time.

prettylou · 07-23-2011, 02:18 AM

Check the orings on the screws that attach the board to the breech. If they look flat , change them and relube. And dont over tighten them. Hope this helps