Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 03-30-2010, 08:58 AM #1
Lumpy21
You can't wipe a welt
 
Lumpy21's Avatar
 
Join Date: Mar 2010
Location: Chelmsford
a few clicks

after airing up the SLG, turning it on... i got to fire a couple shots and all there is si clicking from the trigger... about 8-9 times then it will shoot... anyone know of this happening before?
__________________
Free Agent for 3 or 5 man Tournaments
Fox4, Boston, and NH area, please PM me if you need a player


Invert Mini - Dust Black
CF NightStick
Liquid Grey Dye Rotor
PE 68/4500
Lumpy21 is offline   Reply With Quote
Old 03-30-2010, 10:15 AM #2
Latsabb
 
 
Join Date: Nov 2009
Location: Bergen, Norway
I have had this happen way back. It was more than likely a low battery, but it is also possible that the bolt was not properly lubed. I did both at the same time after troubleshooting for a day, so I cannot be sure which one it is, but I have seen many people with low batteries having the click thing going on.

My battery was pretty new though, and I had only put about 200 shots through it when it started. However, if you are still using the Proto battery that came with the gun, throw it away. Those batteries are grade A crap. Grab a paintball 9volt, or a good lithium.
Latsabb is offline   Reply With Quote
Old 03-30-2010, 07:08 PM #3
Xtrophy
Pump-o-Matic
 
Xtrophy's Avatar
 
Join Date: Dec 2009
Location: Crawfordville, Fl
Just like Latsabb.

If you messed with the settings make sure you have the dwell and sensitivity at stock levels and change the battery. That is usually the cause of the solenoid not having the power to pull the sear.

Check those things and get back to us.
Xtrophy is offline   Reply With Quote
Old 03-30-2010, 11:06 PM #4
Latsabb
 
 
Join Date: Nov 2009
Location: Bergen, Norway
Also note that unless you have a third party board, or the SLG UL, you will not have a dwell setting.
Latsabb is offline   Reply With Quote
Old 03-30-2010, 11:33 PM #5
Xtrophy
Pump-o-Matic
 
Xtrophy's Avatar
 
Join Date: Dec 2009
Location: Crawfordville, Fl
Quote:
Originally Posted by Latsabb View Post
Also note that unless you have a third party board, or the SLG UL, you will not have a dwell setting.
Forgive me I should have stated that specifically. Thanks for covering my *** though
Xtrophy is offline   Reply With Quote
Old 04-17-2010, 10:16 PM #6
bradthelegend
Rec ballin'
 
bradthelegend's Avatar
 
Join Date: Feb 2010
Location: Columbus, GA
bradthelegend plays in the APPA D5 division
bradthelegend has achieved Level 1 in PbNation Pursuit
bradthelegend has perfected Level 1 in PbNation Pursuit
bradthelegend has achieved Level 2 in PbNation Pursuit
this happened to me. the front of the bolt came slightly unscrewed from the back and kept getting caught on the sear; you fire a few shots, ramp a little bit, and then boom, nothing but clicks. i had to get the front part loctited back on to the back (apparently it's not supposed to unscrew.) check your bolt and see if this is the case.
bradthelegend is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump