[411alphaomega]

I was wondering if anyone has or knows how to put a 10 or 15 round phantom style loader on a KP, and if its possible where would i buy one. I was using a little pocket hopper but im pretty new to pump and was dry firing a lot while playin due to balls not loading. So i grabbed a Proto primo (which is a great loader by the way) but its too damn big i got shot out 3 or 4 times on the loader.

Any help is appreciated

[nerdcore]

A better pocket hopper could be another advantage. The GXG, Brass Eagle, or similar pocket hoppers are garbage unless you sand down the inner lip, where balls get hung up right above the neck.

The last time i've seen stick loader conversion kits was for automags.

[EvilAuthorityX]

http://www.paintballgateway.com/wgppugun13ro.html

these work on any feedneck not just wgp, problem solved

[nerdcore]

Well that's one solution. Plugs right into the existing feedneck. I was picturing more of feedneck replacements.

[bmali98]

No-one makes an ion threaded stick feed. I bet any machine shop could shave down and thread the Trinity stick feed to fit ,that would be the route i would go.

[The Inflicted]

Suppoedly the new APP pocket hoppers are much less likely to jam than the old BE/GXG design. I'm actually pretty happy with my BE pocket hopper once I learned to shake it frequently.

Also, $30 is way too much to pay for that horizontal tube adapter.
I could make something like that with $6 worth of parts from a hardware store WITH a speedgate.
If it actually fit flush to the body (it doesn't) it might be worth it.