Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 07-19-2014, 04:13 PM #1
Graebner
Matrix Freak!
 
Graebner's Avatar
 
Join Date: Jan 2009
Location: St Louis, MO
Graebner plays in the MiLP
Graebner plays in the APPA D4 division
Think I'm stupid... I sent into dye they fixed it... But now 125psi like dye it tithe bolt will not cycle like it's not enough pressure... It's has to have about 150psi just to cycle!!! And shoots over 300fps Dwell:11. (Tryed 9-11 dwell) Green bolt tip...

Any ideas to get it back down to 125psi?
Things I've done
Changed orings
Fresh (proper lube)
New battery.....
__________________
"Bad News and Good News, Bad News is were all going to die! Good news is There is No More Bad News!" Cpl Graebner, Clinton R USMC

Last edited by Graebner : 07-19-2014 at 04:20 PM.
Graebner is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 07-21-2014, 03:26 AM #2
rosakatten
 
 
rosakatten's Avatar
 
Join Date: Mar 2013
Did it just stop cycling iver night or did you change anything? Does the bolt rest in back position when aired up.
Quote:
Originally Posted by Graebner View Post
Think I'm stupid... I sent into dye they fixed it... But now 125psi like dye it tithe bolt will not cycle like it's not enough pressure... It's has to have about 150psi just to cycle!!! And shoots over 300fps Dwell:11. (Tryed 9-11 dwell) Green bolt tip...

Any ideas to get it back down to 125psi?
Things I've done
Changed orings
Fresh (proper lube)
New battery.....
rosakatten is offline   Reply With Quote
Old 07-21-2014, 07:25 AM #3
the korean1
Team Carnage
 
the korean1's Avatar
 
Join Date: Jan 2006
Location: 615
 has been a member for 10 years
the korean1 supports DLX Technology
the korean1 supports Ninja Paintball
You have to check from air source. And then work your way up.
check reg making sure it's built correct.
solenoid and manifold has no blockages.
And what was the reason for sending to dye?
__________________
Misc items for sale!
http://www.pbnation.com/showthread.php?t=4000228.
the korean1 is offline   Reply With Quote
Old 07-21-2014, 09:31 AM #4
Graebner
Matrix Freak!
 
Graebner's Avatar
 
Join Date: Jan 2009
Location: St Louis, MO
Graebner plays in the MiLP
Graebner plays in the APPA D4 division
Same issue why I sent to dye...

Nothing changed Basicly stoped over night....

It shoots over 300 at 150psi... But that's bout it...

I can rebuild everything if needed including reg seats..
__________________
"Bad News and Good News, Bad News is were all going to die! Good news is There is No More Bad News!" Cpl Graebner, Clinton R USMC
Graebner is offline   Reply With Quote
Old 07-21-2014, 11:05 AM #5
Blusylver
 
 
Join Date: Feb 2006
 has been a member for 10 years
I think your noid is bad. I had the same issue a few years back. mine had to be around 165, I took the gun to cup and had them tech it. they replaced the noid but didn't lower the pressure. the new noid blew during the first game. no one lowered the pressure, and I didn't even think about it cause they said that it was all fixed and good to go.
__________________
GEAR BAG SALE
http://www.pbnation.com/showthread.php?t=3899747

Last edited by Blusylver : 07-21-2014 at 01:46 PM.
Blusylver is offline   Reply With Quote
Old 07-21-2014, 12:26 PM #6
Hotrod95
Dorito Player
 
Hotrod95's Avatar
 
Join Date: May 2012
Location: ABQ, New Mexico
Hotrod95 supports Ninja Paintball
Did you just need a new pilot or manifold too? Blu
__________________

B'WINGED DYE NT11
Hotrod95 is offline   Reply With Quote
Old 07-21-2014, 01:45 PM #7
Blusylver
 
 
Join Date: Feb 2006
 has been a member for 10 years
I'm not sure. they told me that the noid was replaced. then the 2nd time they sent me another complete setup. I didn't troubleshoot it
__________________
GEAR BAG SALE
http://www.pbnation.com/showthread.php?t=3899747
Blusylver is offline   Reply With Quote
Old 07-21-2014, 02:50 PM #8
Graebner
Matrix Freak!
 
Graebner's Avatar
 
Join Date: Jan 2009
Location: St Louis, MO
Graebner plays in the MiLP
Graebner plays in the APPA D4 division
Maybe.... I just want my **** working again... I just seems so freaking loud compared to what it used too.... I used to have it around 120-125psi perfectly..... Then at about that psi started to shoot 300 plus I lowered psi to about 110 that started happening... Then lowered to about 95psi shot freaking awesome 285 very consistant! Then few weeks later would only shoot about hopper and pod then get stuck back position... Sent into dye they said just set psi to 125psi and set dwell to 9 and said it worked great. Came back to me shot awesome used in turny and then now it's like my of post
__________________
"Bad News and Good News, Bad News is were all going to die! Good news is There is No More Bad News!" Cpl Graebner, Clinton R USMC
Graebner is offline   Reply With Quote
Old 07-22-2014, 11:38 AM #9
the korean1
Team Carnage
 
the korean1's Avatar
 
Join Date: Jan 2006
Location: 615
 has been a member for 10 years
the korean1 supports DLX Technology
the korean1 supports Ninja Paintball
How's your regulator on air tank?
can you try another tank and reg?
__________________
Misc items for sale!
http://www.pbnation.com/showthread.php?t=4000228.
the korean1 is offline   Reply With Quote
Old 07-22-2014, 03:11 PM #10
Graebner
Matrix Freak!
 
Graebner's Avatar
 
Join Date: Jan 2009
Location: St Louis, MO
Graebner plays in the MiLP
Graebner plays in the APPA D4 division
I have a ninja at 800psi and pure energy at same.... Both work fine on DM12/pm8/and two different dm3's
__________________
"Bad News and Good News, Bad News is were all going to die! Good news is There is No More Bad News!" Cpl Graebner, Clinton R USMC
Graebner is offline   Reply With Quote
Old 07-22-2014, 07:07 PM #11
Paint_hore
PBN=SUA syndrome
 
Paint_hore's Avatar
 
Join Date: Apr 2001
 has been a member for 10 years
noid is shot or there is debris in the manifold.
__________________

evil balla 21 is a liar
Paint_hore is offline   Reply With Quote
Old 07-22-2014, 11:01 PM #12
Graebner
Matrix Freak!
 
Graebner's Avatar
 
Join Date: Jan 2009
Location: St Louis, MO
Graebner plays in the MiLP
Graebner plays in the APPA D4 division
Well I'll try to clean the fold see if that helps... If not I'll order new noid... That should clear everything up? If it's not the noid what else could it be?
__________________
"Bad News and Good News, Bad News is were all going to die! Good news is There is No More Bad News!" Cpl Graebner, Clinton R USMC
Graebner is offline   Reply With Quote
Old 07-23-2014, 08:59 AM #13
Blusylver
 
 
Join Date: Feb 2006
 has been a member for 10 years
if its the noid, do yourself a favor and put a virtue board in it as well.
__________________
GEAR BAG SALE
http://www.pbnation.com/showthread.php?t=3899747
Blusylver is offline   Reply With Quote
Old 07-23-2014, 09:35 AM #14
Graebner
Matrix Freak!
 
Graebner's Avatar
 
Join Date: Jan 2009
Location: St Louis, MO
Graebner plays in the MiLP
Graebner plays in the APPA D4 division
Why is that? I'm just wondering? Finer tuned dwell? Or?
__________________
"Bad News and Good News, Bad News is were all going to die! Good news is There is No More Bad News!" Cpl Graebner, Clinton R USMC
Graebner is offline   Reply With Quote
Old 07-23-2014, 12:04 PM #15
Hotrod95
Dorito Player
 
Hotrod95's Avatar
 
Join Date: May 2012
Location: ABQ, New Mexico
Hotrod95 supports Ninja Paintball
I think stock boards malfunction sometimes making the dwell too high or too low. Also how do you clean the manifold
__________________

B'WINGED DYE NT11
Hotrod95 is offline   Reply With Quote
Old 07-23-2014, 12:29 PM #16
Graebner
Matrix Freak!
 
Graebner's Avatar
 
Join Date: Jan 2009
Location: St Louis, MO
Graebner plays in the MiLP
Graebner plays in the APPA D4 division
I figure taking the noid off cleaning with q-tip. I think anyway... Taking apart the noid and cleaning that too well taking apart as much as I can.... I think anyway
__________________
"Bad News and Good News, Bad News is were all going to die! Good news is There is No More Bad News!" Cpl Graebner, Clinton R USMC
Graebner is offline   Reply With Quote
Old 07-23-2014, 01:43 PM #17
Blusylver
 
 
Join Date: Feb 2006
 has been a member for 10 years
I myself have blown 4 noids when using stock boards. Once I switched over to virtue redefined or oled I have not blown another noid since. if you look back me or hore started a thread about it. we had several people (I believe it was like 16)post who blew noids on stock boards and not one person blew on when using virtue.
__________________
GEAR BAG SALE
http://www.pbnation.com/showthread.php?t=3899747
Blusylver is offline   Reply With Quote
Old 07-25-2014, 02:11 PM #18
Graebner
Matrix Freak!
 
Graebner's Avatar
 
Join Date: Jan 2009
Location: St Louis, MO
Graebner plays in the MiLP
Graebner plays in the APPA D4 division
Yea soo I am STUPID! Lol girlfriend took out battery and replaced with a used one and it was low.... I poped a new in and turned down to 115 psi shoots 288-290 fps with a random 299 (could be paint) but I'm shooting with dye cf .684... And it semi overbored for the paint....
__________________
"Bad News and Good News, Bad News is were all going to die! Good news is There is No More Bad News!" Cpl Graebner, Clinton R USMC
Graebner is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump