So I recently go into pump A LOT. I love it and everything about it. I would love to try out the Hitmen mod for my 05 prostock and so I decided to build one. I went to Home Depot (love that place) and bought a piece of plexiglass that was 1/8 in thick and was about 4" x 8" and picked up some 10/32 bolts that were about 1/4" long.
(This was after I made my first cut)
Then I used my Dremel (well my Black and Decker knock off) and cut a piece that was about 5" x 1 1/2". If you look on my cutting mat, you can see the rough numbers.
Then using my dremel, I drew the shape I wanted and started sanding it down until the shape was achieved.
The edges look rough and uneven only because of the plastic coating on the top and bottom of the piece.
More pics before I hit the sack...
And yes... I know my workstation is ghetto. But hey I don't have a workshop, so I need to make due.
Here are some finished pics of it installed on my gun. Sorry about the poor quality.
After installing it, I took it off. While the shape and feel is EXACTLY what I thought it would be, the 1/8" Plexiglas is too flexible. I was possibly thinking about doubling it up or trying it again with a thicker piece.