Stacked Tube Viking

BlackWiddow · 01-21-2011, 02:51 PM

will this ASA fit onto the body? ive got one ordered and ive been trying to get as many other parts ordered as well.

http://macdev.net/store/product_info...roducts_id=126

TheePsycho · 01-21-2011, 02:56 PM

It will fit but personally the one Meurom makes is nicer or the ccm autococker vasa is nice with the wings to prevent movement.

BlackWiddow · 01-21-2011, 03:05 PM

how much is Meurom's? hes making me a bolt currently so i'm not against putting him to work a little bit.

MeuroM · 01-21-2011, 10:05 PM

PM me with questions. Though, my SVA is a sidewinder top / vASA combo, so it for and only work with a sidewinder. Also, I think I did mod a CCM no hole vASA for someone, bottom of the merlin extrusion doesn't have the same radius as a 2k+ wgp body. Once fitted, it looked nice.

THE Hulk · 01-22-2011, 07:33 AM

Quote:

Originally Posted by MeuroM

PM me with questions. Though, my SVA is a sidewinder top / vASA combo, so it for and only work with a sidewinder. Also, I think I did mod a CCM no hole vASA for someone, bottom of the merlin extrusion doesn't have the same radius as a 2k+ wgp body. Once fitted, it looked nice.

I think the answer is yes, but will your SVA work with SST, too?

Viking59 · 01-22-2011, 08:57 AM

how about the eye covers? any luck. I am almost done just need them.

MeuroM · 01-22-2011, 02:14 PM

Quote:

Originally Posted by Viking59

how about the eye covers? any luck. I am almost done just need them.

I'm still testing the mill, it's going foward, thing is not bad.

Quote:

Originally Posted by THE Hulk

I think the answer is yes, but will your SVA work with SST, too?

I'm not sure, but I thought SSTs and Sidewinders used the same tops. If so, then the answer is yes, but I have none to test and measure.

skinnyfatguy · 01-22-2011, 09:37 PM

Quote:

Originally Posted by THE Hulk

I think the answer is yes, but will your SVA work with SST, too?

Yes, Sidewinder and SST tops are interchangeable so it'll work.

BlackWiddow · 01-25-2011, 07:50 PM

Ok so i have another question. What all would need to be done to a 06 cyborg board, or a cyborg virtue board for it to work with the solenoid? which would be easier to use?

skinnyfatguy · 01-25-2011, 08:02 PM

You would need to either crimp or solder a two pin picoblade molex connector on. They're pretty standard as DM, Ego, Cyborg and quite a few other boards use those connectors. I picked up the crimper, terminals and connectors and can do it fairly cheaply. PM me for a price since AKAOG is down and PBN isn't so friendly about advertising prices.

curly2k3 · 01-25-2011, 08:14 PM

or buy one of those dc adapters

BlackWiddow · 01-25-2011, 08:23 PM

Quote:

Originally Posted by skinnyfatguy

You would need to either crimp or solder a two pin picoblade molex connector on. They're pretty standard as DM, Ego, Cyborg and quite a few other boards use those connectors. I picked up the crimper, terminals and connectors and can do it fairly cheaply. PM me for a price since AKAOG is down and PBN isn't so friendly about advertising prices.

so pretty much hooking the solenoid into the board is really all i have to do? that isn't so hard at all. i had a feeling the board settings would definitely tweaked or something.

Quote:

Originally Posted by curly2k3

or buy one of those dc adapters

ahh i see those are pretty cheap. easy fix

xero28 · 01-27-2011, 11:46 AM

I know some of you have seen this, but I figured I'd post up progress of my M. All body work done by hand with various tool, both manual and electric. Still have a few things to work on, but it's almost there.

TheePsycho · 01-27-2011, 11:58 AM

Everything looks great. What kind of feedneck is that?

xero28 · 01-27-2011, 12:06 PM

Quote:

Originally Posted by TheePsycho

Everything looks great. What kind of feedneck is that?

Thanks. I'm not sure about the feedneck. I bought it off of Sean_Chip here on PBN. It's a twist lock and works nicely. I've got an AKA clamping neck on my Merlin that I might swap it out with though.

Leafy · 01-27-2011, 12:08 PM

That quest batwing frame looks perfect on there.

brock_averill · 01-27-2011, 12:40 PM

Quote:

Originally Posted by TheePsycho

Everything looks great. What kind of feedneck is that?

The feedneck is made by Lapco. I had one on my smooth featherlite and I really liked it.

Viking59 · 01-30-2011, 11:20 PM

Shot at 2011-01-30

Shot at 2011-01-30

still a little ruff around the edges but works great, just got done playing some indoor today. I am so glad I did this project.

xero28 · 02-01-2011, 12:12 AM

Is there a break in time for the components in an M? I've got my LPR up to ~85 and HPR up to over 300 PSI and I'm just barely getting 270-275 FPS, can't really get much higher than that. Dwell is set to 12 ms. LPR and hammer cartridge are new, valve is used, though spring might be new (got it from DC). Could it have to do with the valve spring, if it's too tight could it be that it needs a higher pressure to open the valve properly? Should I just keep shooting it to break it in, or is there anything else I should be doing? I'm fine with it shooting 270, I just don't like the fact that I have to have my LPR and HPR up so high.

Thanks

Shibbykins · 02-01-2011, 12:37 AM

put a few cases through it. I used mine in a base tourny where paint was free over the course of 4 days. so i burned 5-10 cases a day with tweaking in between. i wanna say mine was broken in bey case 8 or so.

im really tempted to make someone a killer deal on my M if they want it to support my gun addiction. I need to finish of a PSG1 clone, a MP5 and a few others....

BlackWiddow · 02-01-2011, 08:09 AM

Quote:

Originally Posted by Shibbykins

put a few cases through it. I used mine in a base tourny where paint was free over the course of 4 days. so i burned 5-10 cases a day with tweaking in between. i wanna say mine was broken in bey case 8 or so.

i need to play a tourney like this....