[Franticcpt314]

Will the violent series victory trigger work on a rapper? Just curious the victory trigger looks more comfortable.

[openingact]

No it will not. Marq triggers are designed slightly different than victory triggers.

[KingJester68]

That's actually a good question. Most people on here understand that gen 1 marq triggers wont work on the victory because of the air passage but can the victory trigger work on a gen 1 mark? Anyone with both mind trying it? Kind of curious myself. The microswitch should be located in the same place on the board because the boards are interchangeable so there shouldn't be a problem with the trigger activating the microswitch. Is the screw that the trigger revolves around placed in a slightly different location? The only reason from my understanding that you can't use a gen1 trig in a gen2 marq is the air passage way but i dont see a reason why a gen 2 trig wouldnt work in a gen 1 marq.

[Franticcpt314]

That's why I asked. I couldn't find anything in the sticky about it. Only found people saying a gen 1 won't work on a gen 2.

[gravity5]

http://www.pbnation.com/showthread.php?t=3250307

This shows the triggers side-by-side. You gotta scroll down a bit

probably closer to the gen 5 trigger in fitment

You could make it fit with a little dremeling, but it won't drop right in

[christhered]

i coulda sworn that i saw a violent victory trigger on a rapper or closer in bst... i may have been drunk though

[Franticcpt314]

I guess I'll have to get one and try it. When I do I'll post how it worked and what part if any needs to be changed to make it fit

[Stewey956]

Originally Posted by christhered

i coulda sworn that i saw a violent victory trigger on a rapper or closer in bst... i may have been drunk though

They do have Violent triggers for both models, and it is hard to tell which when it is on gun.

Originally Posted by Franticcpt314

I guess I'll have to get one and try it. When I do I'll post how it worked and what part if any needs to be changed to make it fit

Victory triggers will not fit. They were redesigned for the internal air passages on the Victory.

[KingJester68]

Actually the Violent trigger for the gen2 marq has a much greater curve to it then their gen1 marq trigger. Their gen1 trigger is more shaped like the stock s-class trigger. You can definitely notice the difference when on the gun.

[IgnoranceInABag]

so all that changed was they shaved off half of one side. i see no reason why it wouldnt work

[Stewey956]

Ok, I take back what I said. I think Victory triggers can work on Gen1 Marqs, but Gen1 triggers do not work on Victories.

[IgnoranceInABag]

if i had a gen 1 i would test it but im 99% sure it would work

[herk8240]

Originally Posted by IgnoranceInABag

so all that changed was they shaved off half of one side. i see no reason why it wouldnt work

I think it would have a lot of slop in the frame, it would need a spacer

[IgnoranceInABag]

or a modded trigger pin, but yes it would have lots of side to side play