[flomarilius]

I just bought an epiphany and well I noticed that when I try to walk the trigger it seems as if the gun isnt getting any air in after the first few shots. I looked inside the regulator and noticed there wasnt a spring =/? I saw the manual and obviously determined im missing that spring. Could this be the problem or is there something bigger I need to worry about?

[ice-man]

it sounds like your tank isn,t screwed in far enough to get full pressure the stock asa is crap and hard to get your tank in and out

[Sw00page]

The spring is one of the major components to the piston assembly inside the regulator. This is a huge problem! Replace the spring and you should be okay. Note: make sure you get the specific epiphany/eos rated spring.

[keeperdude]

yeah, that is one part where you can't just slap in the ion parts. They run at different pressures inside.
I suggest making the guy you bought it from get the spring btw

[flomarilius]

yea doing that now he told me he was just going to get me another regulator. Not sure if I use another regulator if I will encounter another problem?

[keeperdude]

As long as its Epiphany/Eos rated youll be fine.

[flomarilius]

lol so now I feel dumb. Apparently Epiphanys don't come with springs inside the regulator. I'm still scrathing my head as to why the manual says so !!

Gun works great thanks for the help I appreciate it. Now to find a good tank for this damn air sucking mammoth.

[Hunter-Stroyick]

what was wrong man? i think im having that problem