Is this normal for a 3 way?
I have a chrome 3 way on a cocker build I am doing. It looks similar to the stock one. anyways, I am trying to time it and cannot get it to work. It almost seems like the pull on the trigger frame isn't long enough for the orings to clear the outer ports on the 3 way. I first tried my hybrid hinge and then a stock WGP hinge and it does the same thing. I can get it to the point where it moves the back block back and forth but there is leaking at each end of the 3 way valve depending on what position it is in (back block moves back leak out one side; back block forward, previous leaky side seals but the other starts to leak).
Can I fix this or should I try a 3 way that works with a shorter trigger pull? If so, which ones are shorter? I have an evil one that needs an oring. Would this one work?