Originally Posted by simplysublime
So here is the deal, my virtue is set to 12.5 bps on my marq
however, when i have the eyes on it shoots about 7, i can turn the eyes off and it shoots just fine.
replaced the batteries
cleaned the eyes
checked the wires
reset the settings to factory then reprogrammed to 12.5
... any ideas?
it could be a few things. first i would check the debounce (green light). the debounce is the amount of time the trigger has to be released before registering the next trigger pull. it can go 1-30. these are milliseconds. if its set at 10 its 10 milliseconds the trigger has to be released before it registers another trigger pull. i set mine at 1 flash and works great.
2nd check the eye delay (solid teal light) the eye delay is also measured in milliseconds. this setting i think has 1-50. 1 being no delay 50 being the most delay. similar to the debounce but works off of the eyes instead of trigger pull.
3rd may sound dumb but worth checking. make sure you have a good hopper with new batteries. not just the gun batteries
4th if non of these work and you have cleaned the eyes like you said you may wanna just get the virtue laser eyes. i have them and they work amazing!
let me know how you make out. hope this helps