Official Vanguard Creed Certified Tech thread!! (TECH QUESTIONS ONLY PLEASE)

OR Baller, CST · 12-05-2011, 01:35 PM

I just recently put an SMP reg on my tank and since then when I first air up my Demon I'll get a leak in the frame but after I take one shot it goes away.

Also I'm having chrono consistency issues. I can't get up to 290 consistently and it's all over the place. I was at the chrono and it was jumping from 280 to 299 to 302 to 260 to 245.

What should I do for these?

bonehead61 · 12-05-2011, 01:41 PM

The eye wires are nicked in 2 places. With them covered up it wouldn't turn on. And the front gripframe screw is extremely soft so im not gonna put it back in cuz it will strip. Ill send it friday.

SHOOTNPOO · 12-05-2011, 05:05 PM

With the 2 wires nicked it could of shorted the board out. Ill look at it once it comes in.

OR Baller, CST · 12-10-2011, 08:10 PM

You said after you put the SMP reg on you lowered the operating pressure. How would I do that? Just lower the dwell and screw in the HPR screw to get the FPS up to 290?

SHOOTNPOO · 12-11-2011, 10:42 PM

With a polished bolt and setting the drive train to be the slickest I could. I then reset pressures in the marker at 118-120 psi and Tuned the Dwell to optimum settings.

OR Baller, CST · 12-12-2011, 11:15 AM

Would it be best to just send it in and have you tune to perfection? If that's the case can you please PM me an estimate of the cost.

SHOOTNPOO · 12-13-2011, 06:10 PM

Please contact Customerservice@vanguardus.com
For pricing info.

Flipmode101 · 12-18-2011, 09:10 PM

Im having a hardtime putting back the back screw from the trigger frame. Front and back thread are good but the back screw in the trigger frame wont screw back in.

SHOOTNPOO · 12-18-2011, 09:50 PM

In a demon or creed?

Flipmode101 · 12-18-2011, 10:08 PM

Demon

Flipmode101 · 12-18-2011, 10:20 PM

Ill give you guys a call tommorrow, im also having some sort of issues with the marker !

SHOOTNPOO · 12-18-2011, 10:21 PM

Are u getting it lined up in the track of the frame?
How are you starting it.
Screw in marker first
Or screw in frame first

Unactive · 12-28-2011, 04:25 AM

Question, should I use buna-n o-rings for everything on my creed? Or would other materials work better for certain parts? Also, I've been using dow33 for my reg, should I continue using dow33 or switch to something else instead?

Ghostman · 12-28-2011, 07:48 AM

Good Day:

I'm trying to charge my battery on my V2 Creed but i dont see any icon on the screen.

I tried unplugging the battery from the board for a few seconds then re-trying but still no icon when I plug the charger in. Any suggestions?

Thank you.

SHOOTNPOO · 12-28-2011, 08:29 AM

Unplug battery for 10-15 min to reset board.
Has the battery been stored for a period of time without charge?

SHOOTNPOO · 12-28-2011, 08:36 AM

Quote:

Originally Posted by Unactive

Question, should I use buna-n o-rings for everything on my creed? Or would other materials work better for certain parts? Also, I've been using dow33 for my reg, should I continue using dow33 or switch to something else instead?

We recommend the buna 70 orings and you must use the british standard orings in the correct places or you will have leaks.

We use vasoline on the creeds, but dow33 is fine.

Ghostman · 12-28-2011, 08:40 AM

Quote:

Originally Posted by SHOOTNPOO

Unplug battery for 10-15 min to reset board.
Has the battery been stored for a period of time without charge?

Okay I'll try that.

I haven't used the marker for around 3 months.

Ghostman · 12-28-2011, 02:13 PM

Quote:

Originally Posted by Ghostman

Okay I'll try that.

I haven't used the marker for around 3 months.

[quote=SHOOTNPOO;73862076]Unplug battery for 10-15 min to reset board.
Has the battery been stored for a period of time without charge?[/QUO

I did what you suggested and it's charging now.... thank you.

I need a part I don't see on your website. I have 2 V2 Creeds and on both the Rubber Button Pads
covering the usb ports have torn off. I've just been using electrical tape to keep it on. What is the name and how much is the rubber cover on the back of the grips that covers all the buttons?

Unactive · 12-28-2011, 02:56 PM

Quote:

Originally Posted by SHOOTNPOO

We recommend the buna 70 orings and you must use the british standard orings in the correct places or you will have leaks.

We use vasoline on the creeds, but dow33 is fine.

Do you know if the O-rings on Mcmaster.com are british standard o-rings? In addition, are there any benefits to using petroleum jelly rather then the dow33?

SHOOTNPOO · 12-28-2011, 06:27 PM

[quote=Ghostman;73864355]

Quote:

Originally Posted by SHOOTNPOO

Unplug battery for 10-15 min to reset board.
Has the battery been stored for a period of time without charge?[/QUO

I did what you suggested and it's charging now.... thank you.

I need a part I don't see on your website. I have 2 V2 Creeds and both of the rubber covers covering the usb ports have torn off. I've just been using electrical tape to keep it on. What is the name and how much is the rubber cover on the back of the grips that covers all the buttons?

Sorry, it was on low inventory. We have pleanty of them in stock here is the link

http://stores.aggressivesportsdistri...on-/Detail.bok

thanks
Eric

SHOOTNPOO · 12-28-2011, 06:30 PM

Quote:

Originally Posted by Unactive

Do you know if the O-rings on Mcmaster.com are british standard o-rings? In addition, are there any benefits to using petroleum jelly rather then the dow33?

NO McMastercarr does not have British orings. You can only purchase these from us at
WWW.Vanguardus.com

Eric