Official Vanguard Creed Certified Tech thread!! (TECH QUESTIONS ONLY PLEASE)

paul_gun · 06-02-2010, 04:41 PM

If you pull the trigger with no air in the gun and your finger in the breech it will throw an eye error because it does not register the movement of the bolt.

the eyes dont just sense paint they sense gaps too..

Thorzie614 · 06-02-2010, 04:47 PM

yeah i figured that out. but i did solve the problem by watching martin's tech vids

SHOOTNPOO · 06-02-2010, 08:18 PM

I'm glad you decided to watch the video! I recomend that you watch all of them so you can learn the marker.

Eric

Thorzie614 · 06-02-2010, 08:24 PM

yeah i probably will because the structure of this marker is unlike any other i have ever owned and can get a lil tricky

CONLIN2 · 06-05-2010, 02:09 AM

This has happened 2 times already I go to pull my bolt out and the pin pulls right out.I have already strecthed the spring out.I don't know what else to do?

SHOOTNPOO · 06-05-2010, 09:54 AM

Quote:

Originally Posted by CONLIN2

This has happened 2 times already I go to pull my bolt out and the pin pulls right out.I have already strecthed the spring out.I don't know what else to do?

What you can do is put a 006 oring in their to tighten it up. If that does not
help you will need to buy new spring and detent.

Avail at store listed in my sig

CONLIN2 · 06-05-2010, 10:02 AM

Quote:

Originally Posted by SHOOTNPOO

What you can do is put a 006 oring in their to tighten it up. If that does not
help you will need to buy new spring and detent.

Avail at store listed in my sig

so put the oring in then the spring and detent

SHOOTNPOO · 06-05-2010, 10:06 AM

Spring, oring, detent

CONLIN2 · 06-05-2010, 10:10 AM

Quote:

Originally Posted by SHOOTNPOO

Spring, oring, detent

Roger that thanks bro

Dshooter89 · 06-07-2010, 05:18 PM

Hello there, by chance i was curious what you get for efficiency with your creed? im only getting with a 48/45 with about 750 psi im only squeezing out like 100 balls or so maybe a bit more...All the air i have left in my scuba and it seems rather odd that its that bad on air...Any ideas? Settings are just as mentioned in a past thread for everything you reccommened.

Thanks, Kyle

SHOOTNPOO · 06-07-2010, 07:23 PM

You could be overpressurized.

Are you dry fireing the marker with that shot count or shooting paint.

Dshooter89 · 06-07-2010, 08:12 PM

Paint. Just paint. No dry firing

SHOOTNPOO · 06-07-2010, 08:47 PM

Try resetting your LPR pressures.
If that does not help replace.

Rear Rammer oring.
inner Valve oring.

thank ERic

JustinPB · 06-09-2010, 06:13 PM

hey eric.
my creed is messing up. when i air it up, it leaks, but once i take a shot it stops. i took it apart and cleaned it but it still happened afterwards. pm me
thanks

SHOOTNPOO · 06-09-2010, 06:24 PM

Where is it leaking from?
Between body and trigger fram?
Or down the barrel?

Eric

Thorzie614 · 06-09-2010, 08:43 PM

between the body and the trigger frame.
(i worked on his gun)

JustinPB · 06-09-2010, 09:54 PM

Yeah between the body and trigger frame

SHOOTNPOO · 06-09-2010, 10:42 PM

Need to take off the Trigger frame and air up the marker. Find out where the air is leaking from?
This is how I can help you get it repaired.

Eric

tylr_byrd · 06-10-2010, 05:08 PM

Alright, so ive had my v2 creed for about 2 months now, only put 10000 rounds into it.... While cleaning my gun I realized that there are cracks running down the porting on my barrel. Its cracked on two of the three porting areas.

I will try and post pics later tonight..

Is there any way to get this replaced? And does this happen often?

Thanks in advance,
Taylor

SHOOTNPOO · 06-10-2010, 05:41 PM

Please email me at
Tech@Aggressivesports.net

To see what we can do please. Will need u to include your serial# in the email.

Thanks Eric

JustinPB · 06-11-2010, 09:50 AM

Okay i figured out the leak is coming from the Mac Noid