Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 02-16-2010, 09:43 PM #1
seminolejoe
 
 
seminolejoe's Avatar
 
Join Date: Feb 2008
seminolejoe is reppin' sidebar 4 life
virtue rotor board

i just installed a virtue board in my rotor. when i power it on it does not spin. i take it apart to check and it works fine. also it does not go into program mode. any help please?
__________________
avidextremesports
RezDogz Paintball
Ball Busters Paintball Park
Proud G6R Owner
seminolejoe is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 02-17-2010, 12:18 PM #2
Tomaconda
 
 
Join Date: Jun 2005
Check that your switch is sitting properly when you put it all together. Sometimes you might have to bend the metal piece slightly.

It is a very thin piece of metal so be careful it doesn't take much force. Just find the midway point and bend it back slightly.
Tomaconda is offline   Reply With Quote
Old 02-18-2010, 11:52 PM #3
seminolejoe
 
 
seminolejoe's Avatar
 
Join Date: Feb 2008
seminolejoe is reppin' sidebar 4 life
after hours of messing with it i noticed the roller on the little metal piece you mentioned was thicker on the virtue board. this could of and still might be a dumb move but i took out the metal piece and replaced it with the stock boards piece and it works great. only time will tell if it will hold up. after i took the stock board piece out it didnt seem to be a bad idea. thanks for your help.
__________________
avidextremesports
RezDogz Paintball
Ball Busters Paintball Park
Proud G6R Owner
seminolejoe is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump