I'm banking your eyes are misaligned. Mine and countless other people have experienced this. Here is what I did to prevent the eye wire from slipping down causing eye faults. Take out your eye wires. Near the eye sensor themselves place and center a 1 inch square piece of electrical tape on the wire and fold the the left and right sides of the excess tape over onto the wire. Like putting the wire in a electric tape coat. Press firmly with your finger to flatten the tape completely out and further sealing the tape on the wire. Do to both left and right eyes. Replace inside your eye covers and see if that helps.
Planet Eclipse Etek
w/. Star frame, 08 Ego expansion board, Etek 3 regulator, Ego10 OOPS ASA, SLS Cure 3+ bolt w/. inserts, Zick kit, Kila detents, Ego 5/6 clamping feedneck w/. Ego 11 lever and Violent thumbwheel, PE red laser eyes, Shaft 4 barrel kit w/. all backs and fronts, both Bump pistons.
V3 Dye Rotor w/. Virtue board
114/4500 Carleton w/. Myth reg
Ego/Etek Parts FS/T