[paint_balla15]

Hey guys I need some help!

Im using a SP Ion, Virtue Board, Virtue Eyes, Dye Rotor, CP Sling Trigger.

Im wondering if I were to set the the MROF at 25bps if I would Chop.
And what setting i should set the rest of the virtue board to prevent chopping. And will the gun be able to keep up?

Any help highly appreciated!!

Thanx!!

[rjones1213]

an ion can do 25bps but depends on internals and your dwell setting
having your dwell too high will slow down the gun

the rotor can keep up with 25bps no problem if you have decent batteries in it so I would say you shouldn't chop if the gun itself can cycle that fast

[maloneoni]

Do you have a qev?

[nerdcore]

Qev would help with cycling speed a bit but not with chopping. As long as the hopper keeps up, you're fine.

[paint_balla15]

No i dont have a qev, just stock i guess.

[spug]

You'll need a qev and a lighter bolt to get anything over 18 or so bps.

It's really kind of pointless though.

[dr. j. h. gerbert]

as long as you leave the eyes on you probably won't chop. However, without a qev and a lighter bolt (such as the deadlywind HP bolt or the TechT L7 bolt) you will have trouble hitting 25 bps.

[rjones1213]

you can always put it on 25bps and see what happens, shouldn't chop but the gun might not cycle that fast.
you probably won't be able to tell how fast it is without a Goldwave

[djtrainer]

Deadly Winds recommends not using QEV on the hollow point bolt. Moves to fast and will chop paint if QEV is used with..... according to there testing ?? Havent tried it. personally so dont know !