The best settings? as in dwell?
Originally Posted by Kolder
How to set Dwell
- Pressurize your Ion at whatever input pressure you wish to use. We suggest between 150-180 psi, depending on the internals. The following steps involve you dry-firing the marker (firing it without paint).
- Lower the dwell setting to the minimum (or an extremely low setting, such as 5 blinks with the stock board, or 8 milliseconds with an aftermarket board).
- Gradually increase dwell until the marker begins to fully cycle. When the marker has trouble cycling, the sound of the bolt firing will be muffled and sound erratic, denoting inconsistencies. When you reach the point where it fully cycles, the marker will make a loud POP for each shot you take, with minimal sound difference between the shots.
- Once the Ion is fully cycling, increase the dwell another 4-6 blinks (2-3 milliseconds with aftermarket board), and that will be your dwell setting.