Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 01-24-2010, 12:42 AM #1
Knave
 
 
Knave's Avatar
 
Join Date: Oct 2003
Location: Illinois
 has been a member for 10 years
CP sling blade trigger

How am I supposed to tell what side is the angled side of the 2 spacers? The CP guide says my trigger should be moving freely...? I cant move my the trigger at all... I must have the spacers facing the wrong way?

AND what the hell do I do with the spring and the other piece with the ball on the end of it?
__________________
My Old Feedback +2/-0

Gearbag sale! Check it out!
http://www.pbnation.com/showthread.p...1#post80326491

Last edited by Knave : 01-24-2010 at 12:50 AM.
Knave is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 01-24-2010, 12:59 AM #2
Knave
 
 
Knave's Avatar
 
Join Date: Oct 2003
Location: Illinois
 has been a member for 10 years
Nvm I might have the spacers right after all... I losened the pre travel screw and it moves... just dont know how to addjust the screw on the trigger. Allen heads that I have are to big.
__________________
My Old Feedback +2/-0

Gearbag sale! Check it out!
http://www.pbnation.com/showthread.p...1#post80326491
Knave is offline   Reply With Quote
Old 01-24-2010, 01:00 AM #3
ProtoxxPaintball
USAF
 
ProtoxxPaintball's Avatar
 
Join Date: Dec 2005
Location: 941
ProtoxxPaintball donated to help Peyton Trent
ProtoxxPaintball supports our troops
ProtoxxPaintball is an NCPA player
ProtoxxPaintball supports Empire
The allen key size that you need is .50
__________________
Old Feedback +54/-0
NIKON D60 FS PM ME
ProtoxxPaintball is offline   Reply With Quote
Old 01-24-2010, 01:16 AM #4
Knave
 
 
Knave's Avatar
 
Join Date: Oct 2003
Location: Illinois
 has been a member for 10 years
Okay... whats the spring and other part for? Did I read that you dont have to install them?
__________________
My Old Feedback +2/-0

Gearbag sale! Check it out!
http://www.pbnation.com/showthread.p...1#post80326491
Knave is offline   Reply With Quote
Old 01-24-2010, 03:41 AM #5
marcusg (Banned)
 
 
Join Date: Jun 2009
the spring rest in the groove on the underside of the trigger and against the pre travel screw that is adjusted from the underside of the frame.
marcusg is offline   Reply With Quote
Old 01-24-2010, 11:05 AM #6
Knave
 
 
Knave's Avatar
 
Join Date: Oct 2003
Location: Illinois
 has been a member for 10 years
why doesnt the guide show that?
__________________
My Old Feedback +2/-0

Gearbag sale! Check it out!
http://www.pbnation.com/showthread.p...1#post80326491
Knave is offline   Reply With Quote
Old 01-24-2010, 11:32 AM #7
Empire92
 
 
Empire92's Avatar
 
Join Date: Oct 2009
Man when i got my cp trigger it took me probably 20 minutes to get that thing in there the right way.
__________________
Smart Parts Ion - Halo V35 - 68/4500 - 14" J&J - CP Feedneck - CP Mini Direct Mount ASA - CP Rake Trigger - Virtue QEV - Virtue Board
Empire92 is offline   Reply With Quote
Old 01-24-2010, 11:36 AM #8
Knave
 
 
Knave's Avatar
 
Join Date: Oct 2003
Location: Illinois
 has been a member for 10 years
I just want to know whether or not I have to put the spring and ball in the trigger? I am waiting to put my gun back together. When I tilt the gun back I cant move the trigger... is that the purpose of the spring? There was a video on youtube that said you dont have to put the spring in? I just need to know if I should take my trigger back out and put the spring in....?
__________________
My Old Feedback +2/-0

Gearbag sale! Check it out!
http://www.pbnation.com/showthread.p...1#post80326491
Knave is offline   Reply With Quote
Old 01-24-2010, 11:36 AM #9
Empire92
 
 
Empire92's Avatar
 
Join Date: Oct 2009
Yeah cp triggers are hard to get in right
__________________
Smart Parts Ion - Halo V35 - 68/4500 - 14" J&J - CP Feedneck - CP Mini Direct Mount ASA - CP Rake Trigger - Virtue QEV - Virtue Board
Empire92 is offline   Reply With Quote
Old 01-24-2010, 12:21 PM #10
dr. j. h. gerbert
Mob Paintball
 
dr. j. h. gerbert's Avatar
 
Join Date: Mar 2008
Location: Buffalo, NY


don't worry, not the first time I've had to post this.

The spring will fit into a groove that is on the trigger, and the other end of the spring should push against the "ball" that is on the end of the screw that is in the frame (the screw that is used to determine how close to the switch the trigger is in its rest position)

-Dr. J
__________________
N I C E Cyborg RX F/S
dr. j. h. gerbert is offline   Reply With Quote
Old 01-24-2010, 12:45 PM #11
marcusg (Banned)
 
 
Join Date: Jun 2009
you really actually have to use the spring if you dont you will have bump shot from hell. and if the trigger is already in place you can try to back in the ball screw as far as you can and try to get it in without removing the trigger. and use a little thread tape on the screw holding the trigger because it likes to back out itself
marcusg is offline   Reply With Quote
Old 01-26-2010, 12:25 AM #12
Knave
 
 
Knave's Avatar
 
Join Date: Oct 2003
Location: Illinois
 has been a member for 10 years
so the spring goes in first and then the screw with the ball?
__________________
My Old Feedback +2/-0

Gearbag sale! Check it out!
http://www.pbnation.com/showthread.p...1#post80326491
Knave is offline   Reply With Quote
Old 01-26-2010, 12:58 AM #13
Knave
 
 
Knave's Avatar
 
Join Date: Oct 2003
Location: Illinois
 has been a member for 10 years
so after more looking around... I take the stock adjustment screw out of the trigger frame and replace it with the ball one supplied by CP?
__________________
My Old Feedback +2/-0

Gearbag sale! Check it out!
http://www.pbnation.com/showthread.p...1#post80326491
Knave is offline   Reply With Quote
Old 01-26-2010, 01:10 AM #14
Knave
 
 
Knave's Avatar
 
Join Date: Oct 2003
Location: Illinois
 has been a member for 10 years
Ive got it firgured out now... I just need to get the stock screw out now... it wont come out any further using the allen head and I have tryed pulling it out with needle nose pliers but I cant get it to come out... ughhh!

Did I strip the stock screw? I dont understand why else it would not be coming out... any ideas on how to get it out?
__________________
My Old Feedback +2/-0

Gearbag sale! Check it out!
http://www.pbnation.com/showthread.p...1#post80326491

Last edited by Knave : 01-26-2010 at 01:17 AM.
Knave is offline   Reply With Quote
Old 01-26-2010, 01:17 AM #15
dr. j. h. gerbert
Mob Paintball
 
dr. j. h. gerbert's Avatar
 
Join Date: Mar 2008
Location: Buffalo, NY
you have to screw it into the frame and it will come out inside.
__________________
N I C E Cyborg RX F/S
dr. j. h. gerbert is offline   Reply With Quote
Old 01-26-2010, 10:13 AM #16
Knave
 
 
Knave's Avatar
 
Join Date: Oct 2003
Location: Illinois
 has been a member for 10 years
That is what I am doing... It wont come out any further. I wonder if I striped the threads on it or something. Does it usually just come completely loose or do you have to pull it out?
__________________
My Old Feedback +2/-0

Gearbag sale! Check it out!
http://www.pbnation.com/showthread.p...1#post80326491
Knave is offline   Reply With Quote
Old 01-26-2010, 11:26 AM #17
dr. j. h. gerbert
Mob Paintball
 
dr. j. h. gerbert's Avatar
 
Join Date: Mar 2008
Location: Buffalo, NY
pictures if possible?
__________________
N I C E Cyborg RX F/S
dr. j. h. gerbert is offline   Reply With Quote
Old 01-26-2010, 12:13 PM #18
Knave
 
 
Knave's Avatar
 
Join Date: Oct 2003
Location: Illinois
 has been a member for 10 years
working on pics
__________________
My Old Feedback +2/-0

Gearbag sale! Check it out!
http://www.pbnation.com/showthread.p...1#post80326491
Knave is offline   Reply With Quote
Old 01-26-2010, 12:27 PM #19
Knave
 
 
Knave's Avatar
 
Join Date: Oct 2003
Location: Illinois
 has been a member for 10 years
I dont know if I can get pics right now... the memory card wont load on to my roomates pc. I have the stock screw almost all of the way out where I can see the white loctite on the bottom part of the threads but I cant get it to fall or come out. It just sits there and spins. I tryed pulling it out but it wont budge.
__________________
My Old Feedback +2/-0

Gearbag sale! Check it out!
http://www.pbnation.com/showthread.p...1#post80326491
Knave is offline   Reply With Quote
Old 01-26-2010, 12:52 PM #20
spug
spuggles
 
spug's Avatar
 
Join Date: May 2005
Location: NY
Annual Supporting Member
spug is a Moderator
spug is a Supporting Member
spug is BST Legit
spug donated to help Peyton Trent
spug supports our troops
spug is Legendary
You are trying to tighten it to the point where it goes all the way IN to the frame, correct?

I know it was mentioned already, but I just want to make sure.

It should just fall out, into the inside of the frame.
spug is offline   Reply With Quote
Old 01-26-2010, 01:12 PM #21
Knave
 
 
Knave's Avatar
 
Join Date: Oct 2003
Location: Illinois
 has been a member for 10 years
Yup... in to the frame... it is sticking way up where I can grab it with needle nose pliers but it wont come any further. I am going to try again... I havent since last night.
__________________
My Old Feedback +2/-0

Gearbag sale! Check it out!
http://www.pbnation.com/showthread.p...1#post80326491
Knave is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump