[mintyfresh911]

I just got a deadly wind hollow point barrel. I don't have a qev or anything, what would be a good operating pressure and dwell setting for my gun?

[DSDM]

Set your dewll at 34ms and try your pressure at 130-150. If it fires reliably drop your dwell 1ms at a time until it stops firing reliably then increase dwell by 4ms that should be good. Then hit a crono station for fine tuning the pressure for about 285 fps

[mintyfresh911]

Originally Posted by DSDM

Set your dewll at 34ms and try your pressure at 130-150. If it fires reliably drop your dwell 1ms at a time until it stops firing reliably then increase dwell by 4ms that should be good. Then hit a crono station for fine tuning the pressure for about 285 fps

Reliability in terms of fps or lines of paint?

[Blitchy]

neither you'll hear it its better to do with paint but not every1 is rich =p what i mean by hear it, is it'll be a loud pop starting out and as you hit the dwell thats to low it'll be a softer pop or what will seem like a half cycle and increasing it back up ensures that your gun will operate on its possible lowest dwell and not have drop off..