[jsharpexp]

What do I need for this gun to run air correctly? I've been told that I need an asa vert regulator and what else? any help would be appreciated.

[jasper371]

You could get an old horizontal max-flow for that rail, or you could just get a vertical regulator.

That looks like all it needs functionally. I'd take it apart and clean it a bit too, and put a drop of oil in the asa when you air it up.

[jsharpexp]

where can i find a vert reg?

[ccluff2]

a part out here on the nation bst

[marcusg (Banned)]

first you need a vertical adapter for a reg to go on. then you need a reg for it. i recommend a hyper3. i run one on my classic and have no issues and is very consistent. also if i were you i would look over the entire gun and make sure it works with no leaks. if you need some one to do the work for its not hard to find someone to do it. pm me if you need any more info and i also have the manual i can send you if you want it.

[jsharpexp]

where can i find a hyper 3?

[marcusg (Banned)]

dye or any other major paintball website. make sure they have the standard threads for them though or you will get the dye ones and it wont fit.

[carolinaragetc]

hope it wasn't gassed up w/o a reg. you might want to find a way to test it w/ a reg before you go and spend a bunch of money on a hyper 3.

[toxic151]

also a ASA with bleed and clamping feed neck. those collar ones dont work too good . warrior makes both very nice and cheap

[marcusg (Banned)]

ndz also makes great feednecks and on/offs with purge. as well as the reg adapters. if you can go ahead and get the RIP valve after you are 100% sure the gun works

impulse parts...
http://www.ndzpb.com/index.cfm?fusea...&categoryID=24

feedneck
http://www.ndzpb.com/index.cfm?fuseaction=catalog.prodInfo&productID=28 1&categoryID=26

[impulserrrrrr12]

rip valve worth the 40 bucks?

[msonic]

Originally Posted by impulserrrrrr12

rip valve worth the 40 bucks?

Based on the performance it is worth $60...