[sellingmystuff512]

Random question, and im sure ive passed it up, but does the new OLED clone board allow fine adjustments to ROF? ( IE 10.3 - 12.5 etc )

This way you don't need to send the board off to flash it for the new PSP rules etc.

Again, sorry in advance, but thank you

[curly2k3]

yes.

[NicholasHoey]

if i have the gold bolt, should i lower dwell?

[ronin31]

Originally Posted by NicholasHoey

if i have the gold bolt, should i lower dwell?

No, you don't have to lower the dwell.

[Dennis Martinez]

What's an easy way to put grip frame back on?

[dukduk]

Originally Posted by Dennis Martinez

What's an easy way to put grip frame back on?

push the front in and hinge the back into position. use a small Allen or pick to keep the wires from getting pinched.

[Dennis Martinez]

ok thanks

[dukduk]

Originally Posted by Dennis Martinez

ok thanks

not to insult but your connecting your molexs before all that right?

edit: or at least running them through the top of the frame and out the molex side of the board?

[Dennis Martinez]

got a problem, leak coming from solenoid. i think its the 7x1mm oring on the mainfold but i dont have any orings and i dont want to mess with the solenoid area. i know jerry well, but its 1 day after hb so i dont want to bug him. anyone else that is a tech that can do a solenoid/ mainfold rebuild or anyone i can buy them both from? i play for st louis hustle, we are a macdev team if that helps

and ya i got the frame on the way u said. with out messing up the wires

[John@MacDev]

I'm with Jerry right now. What exactly did you need and we can help you out.

[Dennis Martinez]

I need a new manifold and solenoid for my clone. So I need to send it In

[davegingras]

did anyone know my russian legion clone in sig is 1 of how much?

[dukduk]

Originally Posted by davegingras

did anyone know my russian legion clone in sig is 1 of how much?

1 of 1, its worth millions

[Burning Ogre]

extra special:

http://macdev.net/store/product_info...roducts_id=170

[Jinx18]

does the clone have an LPR?

[Ol'Baditude]

No.

[Jinx18]

Originally Posted by Ol'Baditude

No.

so bolt pressure is same as HPR pressure?

[dukduk]

ya it's low

[Jinx18]

Originally Posted by dukduk

ya it's low

I am looking to buy a Clone VX but I am concerned with bolt stick. Since the gun does not have an LPR you can't compensate. The gun has a really low operating pressure. Then if you underbore a lot you can lower the HPR even more. On top of that a lot of indoor fields by me are 260 fps which will lower the HPR more. Think all of this combined would lead to bolt stick problems or drop off?

[Ol'Baditude]

Originally Posted by Jinx18

I am looking to buy a Clone VX but I am concerned with bolt stick. Since the gun does not have an LPR you can't compensate. The gun has a really low operating pressure. Then if you underbore a lot you can lower the HPR even more. On top of that a lot of indoor fields by me are 260 fps which will lower the HPR more. Think all of this combined would lead to bolt stick problems or drop off?

Your line of thinking makes sense, but I can neither confirm or deny at the present time. All I can tell you for certain is that I shoot 285 at my field and no bolt stick or FSDO for me. I shoot a original clone with VX internals and Gold bolt, but the original parts never gave me any issues either.
As always, your results may vary.

[ronin31]

Yeah, we've never experienced any bolt stick with either the Droid, Clone or Clone VX. Some may experienced it because of the way it was lubed, same goes for the fsdo problem as well.