[firefoxx04]

best way to do it is to get a pmd or shoot over a crono until your at 285fps

you dont need to worry about the pressure as long as its not shooting over 300fps

[sp33dballer3]

is it cool to screw around with the psi setting when the markers gassed right, because it felt waaaay tight I was worried I was like f***ing up the reg or something

[SpecOpsDeath]

BTW, for the bolt stick, put in that if your using DP grease, that it is a little too sticky and that can cause it, there was a thread that was here this past week about it and we figured out he was using DP 40 (?). when he went and used sl33k he didnt have bolt stick

[firefoxx04]

first, check if its the red or silver reg seat in the reg.

if its silver, get it replaced with the red one.

then i never really used the stock reg, but its a good reg.

just degass it and zero it out. (bring the pressure screw all the way to 0psi)

then gas it up, and slowly increase pressure, it should not get tite. and make sure to be walking the trigger while doing this (eyes off) and once it shoot, crono it to your desired fps.

[babyboyG3]

exactly what has been happening to my gun,, bolt stick, leaking barrel, and air hog ever since the weather has changed thnks for the answers

[ZGILBERT93]

does anyone know how i can get the breach oring off my g3 without a oring pick set????? PM ME PLEASE!!!!

[disturbed989]

tooth picks work great.

[swedishfishh]

included what board settings i would recommend to new users for best efficiency

[amerbs1096]

my friend has a G3 SE and it is broken. should i buy it from him for 150 and fix it? PM me what u thinlk

[firefoxx04]

buy it from him and fix it.. its not hard to fix.. 150$ plus a 45$ parts kit is 195$ for a SE g3.. worth it in my mind

[disturbed989]

Originally Posted by firefoxx04

buy it from him and fix it.. its not hard to fix.. 150$ plus a 45$ parts kit is 195$ for a SE g3.. worth it in my mind

.

[uhutac]

is it possible to change dwell to 8-10 ms on stock board?

[swedishfishh]

Originally Posted by uhutac

is it possible to change dwell to 8-10 ms on stock board?

Lowest on regular g3/iq is I believe 12ms. The SE version you can.

[ndzionrider]

thank you for this

[RenoFlyer]

Thanks for this thread

[DREWDOG2288]

I had a minor leak through the barrel so I took the gun apart and cleaned it out. Now when I am shooting and I start to rock it faster it seems like i'm losing air pressure. But it's fine when i'm not shooting to fast. Need help. PM me please

[916baller]

might be a dumb question but what is the abs? XD

[firefoxx04]

not a stupid question. ABS can be confusing

anti bolt stick

example: if your dwell is set at 14ms, an ABS of 2 will make your FIRST shot a dwell of 16ms.

it helps over come bolt stick by raising the first shot's dwell.

i think some boards work like this. DWELL 14ms ABS 16MS.
the first shot would be 16ms dwell and the following would be 14ms.

most boards would be DWELL 14ms, ABS 2ms.
that just means the first shot is 2ms higher in dwell than the set dwell.

make sense?

[916baller]

Originally Posted by firefoxx04

not a stupid question. ABS can be confusing

anti bolt stick

example: if your dwell is set at 14ms, an ABS of 2 will make your FIRST shot a dwell of 16ms.

it helps over come bolt stick by raising the first shot's dwell.

i think some boards work like this. DWELL 14ms ABS 16MS.
the first shot would be 16ms dwell and the following would be 14ms.

most boards would be DWELL 14ms, ABS 2ms.
that just means the first shot is 2ms higher in dwell than the set dwell.

make sense?

oh wow im dumb haha thanks man. makes sense.
i know the anti bolt stick thing, didnt know thats what it stood for though.

[jerryjjackson69]

I have a unique G3 problem...

The gun is an original G3, not and iQ or SE or spec-r. The gun fires, up to a point, as soon as exceed the PSI input the yields 200 FPS, the gun ceases to fire... I can operate the gun at lower pressures, but its no use past practice or playing recball... anyone experienced can take too much advantage of it. I've tried a new battery, same issue, new reg, same issue, new noid, same issue. However the tech at my field (also employer) says its still the noid, that I may have gotten a bad noid replacement.

Before I go through the hassle of contacting DP and getting the noid replaced again, is there anything else I should try? Getting the noid right now would be tough as I am on the move changing residence between college and home all the time right now.

Help? Thanks guys.

[Raeven]

When's the last time you serviced the reg?