[Fox-259]

ok sooooooooo I got a question about the board in my shocker.

My probelm is when I shoot with the eyes on the gun caps and seems like it shoots rough and won`t shoot consistent, it`s like the loader won`t keep up. I have the gun at 15 bps psp.


Now the thing is when I turn the eyes off the shoot will shoot the marker shoots awesome, it shoots consistent smooth as anything.


I have a feeling it`s the ramp percentage which is set at 500%.

I once had a teammate with a dm8 that had a tadao board and he had the same problem like this and he said it was something like this.

here are my settings

firing mode - psp
ROF - 15.0
EYE MALFUNCTION ROF - 08
DWELL -12.5
DEBOUNCE -05.0
ADJUT TRIGGER SENSEITIVITY - MED
ANTI MECH BOUNCE - LOW
DRILLS - OFF
TIME - OFF
EYE DELAY - 03.8
REFLECTIVE EYE - OFF
ANTI BREECH BOUNCE - HIGH
ANTI BOLT STICK - 12.5
POST BREAKOUT - SEMI
RAMP ACTIVATION SPEED - 05
RAMP PERCENTAGE - 500%
RAMP AFTER SHOCKETS - 01
RAMP RESET TIME - 01.0 SECONDS
BURST SHOTS - 03
AUTO SHUTDOWN - ON
EYE SENSITIVITY - 06.0

[Uziel Gal]

If it is the eye that appears to be the cause of the issue, then altering the ramp percentage probably won't improve matters.

Certainly initially, I would concentrate on trying different setting for the parameters that directly effect the eye - eye delay, anti breech bounce and eye sensitivity.

[Fox-259]

kk I messed around a tiny bit but nothing, I acutally think the eyes are just about dead, I`m going to bring home a set here from work to try out tonight . I`m also going to reset the board to stock again.

[RitcheyMetals]

also is the eye mode on the board set to the right set i.e. reflective or break beam? fresh battery? just a few small things to check.