[eternalmergy]

my eyes were too tweaking out, so i upped the eye delay to 4, and sensitivity to i think 13?

eyes are fine now

[avid.]

my dwell is at 9.5 currently.
ill post up all my settings soon.
i just need to get to a chrono to adjust my pressure cause i rebuilt the whole gun 2 days ago and i think its shooting way too hot.

[L_x]

I upped my eye sens. to 12.

[avid.]

Originally Posted by Judojack5

I found out that if you go to information on your guns screen then it'll tell you what version you have. I got version one but i've only had a few problems with it

incorrect.
that is the board software; it tells nothing about the gun being v1 or v2.

my gun is infact a v2, and my software is v1 on the board.

difference between v2 and v1 i believe . . .
i was told in the past the main difference between the two was the internals, and the back screw that holds the body to the frame together.


CRE001-00100 is my serial.

my eye sens. is at 10, which i believe is stock.

[Judojack5]

well poo, i thought i solved the mystery on how to easily tell what version your gun is

[phantomette]

Originally Posted by avid.

incorrect.
that is the board software; it tells nothing about the gun being v1 or v2.

my gun is infact a v2, and my software is v1 on the board.

difference between v2 and v1 i believe . . .
i was told in the past the main difference between the two was the internals, and the back screw that holds the body to the frame together.


CRE001-00100 is my serial.

my eye sens. is at 10, which i believe is stock.

same on the versions and yes 10 is stock

my creed is 00211, and 5 pages in less than a day ...not bad

[alinero718]

Originally Posted by avid.

why do you need new eyes.
did you break yours, or are you just curious.

just curious

[phantomette]

damn bro your creed will look insane soon

[L_x]

paul_gun might need to correct me if I'm wrong here, but the easiest way to tell if your marker is v2 or v1 is:



^ Trigger frame screw (circled) is inside the trigger frame area, so it's a V1. However, a V1 can easily have V2 internal parts and be the same as a V2 internally.



^ No visible screw inside the trigger frame area, as the screw on V2's are moved to the space inbetween the frame and reg and less noticable. So this is a V2.

[eternalmergy]

oh, thats so simple, thanks!

edit:
is there an advantage of having a v2 over a v1 with v2 parts?

[paul_gun]

V1 with V2 parts in will perform the same as a V2 out of the box

the main difference between the v1 and v2 other than the valve parts is we switched to flat eyes for ease of assembly as well as improved the internal bores for assembly. any gun with the v2 parts will perform the same.

[eternalmergy]

oh alright, thats cool

is there a place i can buy the portable charger? the battery door on mine is broken, and my dad snags my charger for his ipod and blackberry

[phantomette]

cool facts to know

[phantomette]

okay guys I finally had the chance to shoot my Creed marker for the first time I decided to give it a true test of BALLS! and go uncapped Ramp 25 bps max......I have the HPR out 1.25 turns from in, and the LPR 1 turn out from flush

My only issue is that the gun shoots the paint great if I am on it, consistently, but when I get to almost the end of the hoppers paint I get 1 to 2 breaks, now I am using the 693 bore and overboring w 689 paint, its players choice too which is a harder shell so any suggestions???

settings

Fire Mode
Ramp
start 4 bps
stop 5 bps
reset 1 bps
semi shots 3
max burst 3

Settings
Dwell 13
Debounce 5.5
eye delay 3.5
eye sens 10
bolt delay 8.0 ms
clear shot - on
FSDO time - disabled
FSDO Dwell 1.0 ms
Loader Pulse 20 ms

[L_x]

I had a similar issue a while back, turned the eye sens up to 12 or 13 and it was sorted. Give that a shot.

[phantomette]

Okay I just got in touch w ShootNPoo (Creed Tech in the USA) he gave me his setting which required the eye sens. at 7 or 8.... I ran 7 and then put some other settings and HOLY fuk it rips w no breaks shooting DXS gold, luvin the creed!

so here are my new settings try this and lmk what you think my gun nib absolutely gave me a boner!!

LPR 1/2 turn out from flush (towards barrel) HPR 1.25 turns out from all the way in
Settings:

Ramping 25 bps

Paint DXS GOLD (super brittle)
Loader - Prophecy

Dwell 11
Debounce 4.5
eye delay 3.0
eye sens 7
bolt delay 8.0 ms
clear shot - on
FSDO time - disabled
FSDO Dwell 1.0 ms
Loader Pulse 20 ms

[SHOOTNPOO]

Yeah its about time for this to come around!!!

[phantomette]

now lets show suckas what these creeds can do to faces!!!

[SHOOTNPOO]

Here you go

[phantomette]

[SHOOTNPOO]

I see you like my settings!!!!!!!!!!