[hailstormjman]

Originally Posted by Pensacolaballer

My personal favorite settings are:
dwell at 7
130psi
all 4 spacers
blue flow insert.

You wouldn't believe how quiet this thing is. I love my baby

what's your fps? seems like it would be really low w/ all 4 spacers at 130 psi.

[joao]

My settings are:

Dwell-6
Insert-Blue
Spacer Body+1
285fps

look´s great for me...

[Pensacolaballer]

Originally Posted by hailstormjman

what's your fps? seems like it would be really low w/ all 4 spacers at 130 psi.

280. Fresh shims, I'll be turning up a bit this weekend. Shoots wonders.

[Vissa]

Watch out for the barrel threads, I cut myself deep today. ;P

[jsportracing]

Originally Posted by Pensacolaballer

280. Fresh shims, I'll be turning up a bit this weekend. Shoots wonders.

Fresh shims?

[MoB StronG]

Go with original post settings... I would have to say, best settings that there is!

[tyler12]

i tryed ur setting right out of the box

[Pensacolaballer]

Originally Posted by jsportracing

Fresh shims?

new reg shims make a stiffer shim stack.

[jsportracing]

Originally Posted by Pensacolaballer

new reg shims make a stiffer shim stack.

so your replacing your shims cause they are worn out, faulty or there are better shims??? whats does this achieve and how does it benifit your set up?

[JesusLovesEgos]

Originally Posted by Pensacolaballer

new reg shims make a stiffer shim stack.

so you replaced your brand new reg shims with brand new shims?

[john ho]

I love these settings
Dwell:7
Blue tip insert
Spacer body and 1 spacer

[ezekiel2517lim]

I just put these settings in and DAMN! Me gusta

[mrg33]

Dwell-6
Insert-Blue
Spacer Body+1
about 295 fps

My Nt Rocked. Love these settings.....

[okitoki]

Dwell: 8
insert: blue
spacer body + 1 ring
velocity: 280

only had a chance to shoot 1 hopper with it. Seems smooth and no kick, but wasn't too consistent with the fps. Will have to try it again next time with more paint.

[Dkwak]

Virtue redefined:
Dwell: 14 (7 w/o Virtue)
Insert: blue
No spacer body
velocity: 290
All upgrades (spiring/notched bumper/ASA/eye pipe)
Rendition magnetic trigger kit

2 cases through it with these settings (prior to that 10 cases since bought at USPL Vegas WC), Smooth, consistent (+/- 3 to 5 fps), no kick, super responsive.

[GUMBAL]

Originally Posted by Dkwak

Virtue redefined:
Dwell: 14
Insert: blue
No spacer body
velocity: 290
All upgrades (spiring/notched bumper/ASA/eye pipe)
Rendition magnetic trigger kit

2 cases through it with these settings (prior to that 10 cases since bought at USPL Vegas WC), Smooth, consistent (+/- 3 to 5 fps), no kick, super responsive.

14, dwell equivalence without virtue redefined ?

[Dkwak]

"NT redefined each bleep is .25ms. 14= 3.5 ms 28 bleeps virtue = 7 ms

I sent a message to virtue to make sure and they advised the above.

Z"
This guy called Virtue and got this explanation.

[tyler12]

i had Dwell 7
body spacer
and blue tip
Shootss really nice this saturday when it was around 65-75 Degrees in flordia
and sunday it was 50 and EVERYTHING was chopping
i bought this gun in january so it should have all updates

[tweeter4]

Originally Posted by tyler12

i had Dwell 7
body spacer
and blue tip
Shootss really nice this saturday when it was around 65-75 Degrees in flordia
and sunday it was 50 and EVERYTHING was chopping
i bought this gun in january so it should have all updates

Check paint/bore match and eye pipe

[Dkwak]

Where its breaking is the true question:

If its breaking in the barrel then in colder weather a barrel kit is essential to allow you to go up a higher bore (.693, .695) which should dramatically reduce barrel breaks.

If it's in the breech then your hopper could be to much pressure on the ball (cold makes the shell more brittle). Try a cold weather ball and that could solve your problem.

[prRookie]

OK My NT doesn’t cycle at 130 PSI, how to get it to work, because I think that the kick is the result of the higher pressure. Thanks for any advice.