NEW CHANGE ADDED!!!! See number 4.
I just want to make sure everyone is clear on the updates made to the NT. There have been 3 running changes:
1) Notch cut in the airport. In the newer airports, this un-anodized area will be anodized.
2) Notch cut into front bumper on the piston. This can be easily done yourself, or you can call Dye and we'll send you one!
3) Stronger return spring. Unfortunately you cannot tell the difference between the two springs by looking at them. If you are having chopping issues with your NT and you have the updated piston bumper and airport, you may need to call us for a new spring.
4) Eye pipe. If you HAVE NOT received a new eye pipe from Dye, chances are you have one that is approximately 6 thousandths of an inch undersized on both sides. This is causing guns with new springs and bumpers to still break paint. Please call us immediately with your NT serial number so we can get this new eye pipe to you!
I hope this thread is helpful to all you NT owners. Thank you for your continued support.