leak from the grip frame can be cured by changing the main o-ring, when you take the core peice of the bolt out,, its the second one from the tip, has a metal ridge on both sides, go one size larger than what currently on there, should feel snug in the beercan, not loose
leak from the back panel will probablt be the two o-rings on the tail of the bolt
Slideswitch literally has a slideswitch to turn it on and off on the back of the gripframe. The LED has one pushbutton on the back of the gripframe. LCD has three buttons on the back of the gripframe.
I think you could just buy a used LCD, with eyes for the same cost as a new board and used gripframe for your trix--if it's the slideswitch matrix. LED gripframe would fit a Tadao board, and LCD gripframe would fit any board.
Too bad it wasn't just some leaks or broken wires.
is that the board you need? if so i have one, its not exactly like that one though. its the stock board that came out of my tequila and has gun20 chip. if it is what you need just throw me an offer and its yours.