[viper46uk]

hi,

i have just been given 2 rebel markers, 1 with the 4 function lcd grip which says it is a rebel vertical and the other rebel 02 bottomline with the 32 degrees led grip.
is there anyway to change the settings on the led frame as it only firing standard mode, whats the point of it being an electronic grip if you cant change the settings

[M0N$†3R_3N3RGY]

yes u can change tha setting cause i hav 1 too..............u just gotta kno wut ur doing

[viper46uk]

thanks for that
but could you tell me at all how to change the settings

[EclipseEgoowner#1]

monster will help

[M0N$†3R_3N3RGY]

alright 1st turn on tha electronic frame....2nd press the second button from tha bottom...ok now its at semi auto.......if u wanna change tht then u hav to press func. ..............and then u can scroll threw tha other thing be pressing next....then u scroll through and pick which 1 u want.....then press set.....then keep pressing next till u get to tha exit setting then press exit...and there u go...wutever u picked will set and shooting wutever mode u picked

[viper46uk]

thanks for that monster.
but i think that is the way you change the settings on the lcd 4 function trigger.
i am trying to find out if you can change the settings on the rebel 02 led e-trigger

[M0N$†3R_3N3RGY]

look n tha 32 degrees picture fourm...and look 4 my gun and tell me if thts it

[viper46uk]

is there any other boards you can put into the led semi automatic frame, so i can change the different firing modes.
such as will any sypder electronic boards fit

[viper46uk]

hi,

well this is what i got so far
2 x 32 degrees o2 bottomline markers
both fitted with 32 degrees lcd 4 function trigger
both fitted with 32 degrees compact 2000 expansion chamber kits
1 with 12" night stick barrell
1 with 12" quiet riot barrell
have got 2 of these as well
http://cgi.ebay.com/32-degree-Magna-...QQcmdZViewItem
but dont know if it is ok to fit them to the o2 bottomline markers or what else i would require for them to be ok

also got
a 32 degrees rebel xtreme

these any good

[viper46uk]

which one of these barrels is better
night stick or quiet riot

[mark1975]

The rebel Led frame with semi only, will take a Silver bullet led cicuit board, which has different firing modes.

[Ryan_Pepp]

yes, mark1975 is correct. the led model only has semi. you asked what they point was and it is to achieve a higher rate of fire.

[viper46uk]

can you just start using hpa on these markers or do you have to do any mods to them

[viper46uk]

right ok,
went paintballing today and had to use air and not co2 as normal,
1st of all had to chrono the 3 guns, but with using hpa had to screw the velocity screws nearly all the way and then they only registered at the most 240fps, when using co2 could easyily reach over 320fps+.
also when using hpa i have 2 markers with lcd triggers and 1 with led trigger, when cocked and not gassed up they would fire, but once gassed up we pull the trigger and nothing happen just hear solenoid clicking even with fully charged battery.
what can we do to solve the problem of volecity when using hpa and fixing the problem of not releasing with gassed.

[viper46uk]

hi could you help me,



i currently have 3 paintball markers

2 which are rebel 02 bottom lines

1 which is a rebel xtreme.



my paintball site is converting to just using hpa and not co2

we usually use co2 on these markers, but the site gave us 3 hpa tanks to use

unfortuantley the markers didn't perform has good when we use co2

there was no voloecity, even with the adjustment screw all the way in we couldn't get over 215-220 fps and sometimes

when we pulled the trigger with the adjustment screw all the way in sometimes

it wouldn't release the hammer, all have electronic triggers

is there any solution to this problem.

[demomybiz]

I have a rebel xtreme 02 electronic missing the ball detent the one thats a single screw not the plate w/2 screws anyone no where i can get this part or have one to sell thanks chuck