[Paintin' Corners]

I took my Ion out for the first time today and when I hooked the airtank up and I get less than 100 psi according to the gauge. I think the gauge may be broken but it wasn't getting enough pressure to shoot balls consistently even with the dwell all the way up. after tinkering with it a bit, it wasn't getting pressure enough to fire at all, the only pressure that was releasing was through the bottom of the solenoid...I don't even know where to start, little help?

[[NA]WARLORD]

Fresh Name brand battery.

[QcXf]

Can you list your upgrades? It sounds like one of the hoses inside is pinched.

[SHADOWofFAIR]

Battery or turn your reg up.

[grahamrussell]

their might be a oring busted or ^^^that if its and on off make sure its on all the way theres so much things that could cause this

[SHADOWofFAIR]

Check your tank reg it might need a good oring change or lubing also check your Asa then clean your inline reg. most of the time when you have one of those "not enough pressure" problems it's normally between your tank reg and inline reg. But above all new brand name battery first!