Mq pump pic thread

dyeforever · 07-21-2009, 04:32 PM

Im curious to see how many people have mq pumps. Post up pics and specs of your guns. Also a inside shot of the frame you used would be great.

heres mine.

there we go, found a pic of the inside

specs:
undrilled verta body
semi thin ccm frame
utb board (no cap)
mech a/t
wwa pump kit (milled out)
mq2 valve

Saucy27 · 07-21-2009, 04:46 PM

mine is in the stages of being built.

Right now I just ordered my Eblade frame, so I need the Tboard, and the MQ.
And then Im going to halfblock it.
Will post pics when I get the frame

mxmtl · 07-21-2009, 05:00 PM

WGP 2K2 Body- milling, half block, & EGO feed mod by Carter Machine
WGP Pump Kit drilled for Dual Rods, also by Carter Machine
Dye Angel LCD Frame
UTB Board hacked into an Angel LCD Board
MQ2 Valve

nick87night · 07-24-2009, 02:54 AM

Here's a few of mine i just finished. the pump plate is a little rough but i'll get around to it.

Dye reflex body
ccm pump kit with a/t cam
jcurt dual rod backplate modded a little
wgp "grip" feedneck
Sidewinder Reg
CCM asa and reverse drop
CCM cocking rod cut a little shorter
Check it Detent
UTB board.

drgonzo · 07-24-2009, 03:16 AM

Nice oakley case, man I hate that thing lol

r1dj · 07-24-2009, 01:26 PM

fonzel17 · 07-24-2009, 02:38 PM

Sick MQ's. I like all of those, the only ones I don't like are the dual fingered ones.

washington (Banned) · 07-24-2009, 05:54 PM

really diggin' mxmtl's

matt00iconoclast · 07-24-2009, 06:16 PM

New project after my Evil M.........this

FuzionF88 · 07-24-2009, 06:39 PM

Sorry for Hijacking...but i couldn't help but wonder...
Whats the process of building an mq pump? I have never owned a cocker and know nothing about the valve or anything, but it looks awesome from what i have seen in videos. And it seems like it would be a sweet little build, so whats it take to throw one of these little guys together?

MIA
#73

drgonzo · 07-24-2009, 07:57 PM

Quote:

Originally Posted by FuzionF88

Sorry for Hijacking...but i couldn't help but wonder...
Whats the process of building an mq pump? I have never owned a cocker and know nothing about the valve or anything, but it looks awesome from what i have seen in videos. And it seems like it would be a sweet little build, so whats it take to throw one of these little guys together?

MIA
#73

Basically you need an open-class type sniper (regulated), an mQ and frame with a control board in it.

nick87night · 07-24-2009, 11:13 PM

here's a good MCB thread. http://www.mcarterbrown.com/forums/c...ss-25-how.html

chongballa · 07-24-2009, 11:23 PM

Quote:

Originally Posted by washington

really diggin' mxmtl's

i agree. thats the coolest mq pump ive seen

pump · 07-25-2009, 04:39 AM

R1DJ thats a nice one

heres a not so nice one
http://www.youtube.com/watch?v=O3qtBpfRJWU

matt00iconoclast · 07-25-2009, 09:09 AM

y are half of you from Hawaii lol

chongballa · 07-25-2009, 10:32 AM

them hawaiians love their pumps, but so do i

boog · 07-25-2009, 11:31 AM

Quote:

Originally Posted by matt00iconoclast

y are half of you from Hawaii lol

no ka oi...that's why.

pedrofb19 · 07-25-2009, 12:06 PM

tried to buld one but the mq valve wires got cut

pump · 07-25-2009, 02:50 PM

Quote:

Originally Posted by matt00iconoclast

y are half of you from Hawaii lol

because people from Hawaii are not afraid of Innovation

Quote:

Originally Posted by pedrofb19

tried to buld one but the mq valve wires got cut

resolder then back on! or sell to me cheep!!!!!

speedy kthx · 07-25-2009, 04:17 PM

http://www.youtube.com/watch?v=rgUk-NTPJCo

-halfblocked and mini'd karnivore body
-ccm 45* frame and karni specific pump kit with red CF handle
-UTB *WITH* the capacitor
-aka 2litre reg (not the sidewinder in the pics, 2litre is at dc getting rebuilt alongside my PMR ul frame being milled for my evil m)
-bob long gear drive direct mount center macro on/off asa
-12" DW
-virtue destroyer grips
-e-AT switch covered in epoxy
-shocktech supa fly venturi bolt
-wgp pump specific frontblock

and no....i dont use a velocity on this thing, was just for the sake of the video

Ninja-Duck · 07-26-2009, 12:16 AM

Quote:

Originally Posted by mxmtl

[IM]http://farm4.static.flickr.com/3622/3678135492_939c7fc217.jpg[/IMG] [IM]http://farm4.static.flickr.com/3581/3678134402_45426b5672.jpg[/IMG]
[IM]http://farm4.static.flickr.com/3605/3695480538_9edd7eedb1_m.jpg[/IMg] [IM]http://farm4.static.flickr.com/3254/3095194236_a58fe97891_m.jpg[/IMG]
[IM]http://farm4.static.flickr.com/3280/3101996265_26bd2fd052_m.jpg[/IMG] [IM]http://farm4.static.flickr.com/3210/3101995775_3e9f22c781_m.jpg[/IMG]
WGP 2K2 Body- milling, half block, & EGO feed mod by Carter Machine
WGP Pump Kit drilled for Dual Rods, also by Carter Machine
Dye Angel LCD Frame
UTB Board hacked into an Angel LCD Board
MQ2 Valve

That is the cleanest halfblock I've ever seen, let alone an Mq halfblock.