My Ion XE is not degassing like it use to be. I just installed NDZ detents in my marker (had to remove banjos and qev 360), and 32 Degree ASA On/Off (No Bleed System), and Cleaned my regulator and put it all together. I did not fire the marker yet. I was testing ASA for leak (No Leak). I took of my Tank, and my marker sat for 30 mins it didn't degas. Please advise is this something i need to worry? What could be the problem?
your marker doesnt auto degass, you need to always turn off the gun, disconnect the tank and hopper, turn the gun upside down, make sure there are no balls in the chamber, then turn back on and pull the trigger a few times.