Well i got his Omen in, and i got right to work.
I fiix the binding beaver tail in 30 second with a peice of electro tape. I turned the recock all the way doen and thought I turned the reg all the way down. Any way, I took it out to get the reg pressure right by shooting some paint, when I dry fired it, it was so freeking loud, not to mention the bottem of the reg was leaking. I put a ball in it and it must have shot 500 fps! I finally got the reg all the way down to were is looked right, then I addjusted the recock. The Recoil was still to much, even with the recock set right, then I let her rip with a Pod of 100 balls. The CAM worked fine, heck every thing worked fine besides the leak on the bottom of the Reg. But after that 100 rouds, I shot about another 50 times, then I was out of gas. I started with 2500 psi...
I know the problem is with the Regulator, it's shooting super Hot, leaking, and I was surprised it did not over pressurize.
Oh and J, you are missing the sear release....how the hech does it work with out it????
You said the Only problem was the beavertail....boy it's a good thing you did not sell this on ebay.
I am Spartan X. Then I was Spartan II
My Lifestyle Determines My Deathstyle.