[tonloc91483]

I know the posting name will get some peoples hearts racing... sorry in advance

I know over the years a lot of people have mounted custom frames to the Automag.

I personally have modded a angel LCD single and double trigger frame to work.

I was wondering what other frames work with minimal modification?

Lets say classic rail or R/t Rail
Thanks

[C_losjoker]

Its not so much the rail that you use but the body. If you use a classic body you have to drill a hole in the new frame for the twist lock bushing.

But to answer your question, ego frames are pretty simple,somebody recently did a empire mini frame, and of course a few after market frames out there.

[tonloc91483]

I was thinking of modding the frame to the rail. Like I did with my angel frame.

All i had to do is drill a new front hole for the bolt.

To answer your question though I have a ULE body

[luke-AO]

I have 2 new frames out for the Mag, no modding required unless you want to . > http://www.lukescustoms.com/page0010.htm
Frame gives you a starting platform to build a pneumag or epmag.

[demented pumper]

with out minimal mods

[tonloc91483]

Originally Posted by luke-AO

I have 2 new frames out for the Mag, no modding required unless you want to . > http://www.lukescustoms.com/page0010.htm
Frame gives you a starting platform to build a pneumag or epmag.

I like the custom modding part

But I'll take a look. Thanks for letting me know!

[kwik175]

I used a Quest frame and ran the air line thru it to the bottom of the valve. No external air line but extensive modding done.

[KartaKeeper]

Cree Mag

[deano 177]

^^^
thats pretty hot.

[KurtPB]

I can't remember who built a cree-mag or two... Rens? I think that was it. You pick his up or something? I personally like your splash over the flat black that it was.

[SoulCoffin]

yea, it was renie who made the cree mags, and i believe he sold the few that he made. my brother ran into someone who bought one of them, at a big game in nj, i think (or maybe at the west point classic).

[KartaKeeper]

yeah mine was one of the 5 or so Renie built. The blue/Purple splash is outrageous in daylight very loud! The pics were his, I will try and get good ones

He did a very good job on mine and all of them I am sure.

He said he was done building them for a bit.

[LlamaRama]

Fifteen dollars for a crummy aftermarket frame? Like hell!

http://imgur.com/AziRc4V

My first frame convert. Cocker hinge off of a PSYCHOBALLISTICS. Had todremel the hell out of the inside, and also Dremel the trigger itself.


http://imgur.com/yW6k04A

I am currently hammering a rod into an ion trigger. Because why not?

[KurtPB]

Seen your post over on AO but not sure what frame your calling crummy for $15?