Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 06-04-2013, 01:54 PM #1
FilipanicBaller
 
 
FilipanicBaller's Avatar
 
Join Date: Jul 2010
CCM T2 velocity question

I've been playing with my T2 for a few months now and noticed last time that I had some difficulty getting my velocity above 270.

I think I've found the sweet spot on my reg and turned my velocity spring all the way before it stops shooting.

Any ideas?

Also, just ordered some after-market springs. Anyone have any luck with these. I got some called Rap4 autococker springs..

Thanks for your help!
FilipanicBaller is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 06-04-2013, 03:38 PM #2
gamefreak054
CCM T2 OWNER
 
gamefreak054's Avatar
 
Join Date: Nov 2010
gamefreak054 is playing at Living Legends V
gamefreak054 is playing at Living Legends VI
gamefreak054 owns a Planet Eclipse Geo
gamefreak054 posts videos on PbNation
gamefreak054 has achieved Level 3 in PbNation Pursuit
gamefreak054 is attending Decay of Nations VI
gamefreak054 supports DLX Technology
You may have to up the reg pressure a bit. Do you have a reg pressure tester or a field that has one? It should be around 300 psi, sometimes you have to up the reg sometimes.
gamefreak054 is offline   Reply With Quote
Old 06-05-2013, 12:36 PM #3
FilipanicBaller
 
 
FilipanicBaller's Avatar
 
Join Date: Jul 2010
Thanks

Quote:
Originally Posted by gamefreak054 View Post
You may have to up the reg pressure a bit. Do you have a reg pressure tester or a field that has one? It should be around 300 psi, sometimes you have to up the reg sometimes.
Thanks. Unfortunately, I don't have a reg tester. But, I've messed around with it enough so I'm pretty sure I have it set at the right point. I turned up the reg until the point where the velocity started to decrease, then backed it up a quarter turn.

I think I'll try using an aftermarket spring that's supposed to have a bit more tension. See if that works.
FilipanicBaller is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump