[Paintballguy59]

If you have a viking, post information of the marker in the following format. (I figured it would be good to have for the Vikings too as they already have one for the Excal.)

Serial number : 682
Board Type: WAS
Milling Style: Featherlight
Date recieved : 10/13/03
Approx num of shots: 2k
Rof: Unlimited
Lpr pressure: Stock
Feed tube : Low rise
Pinches per hopper: none
Chops: what are they?
Breaks:none
Loader: halo b
Air system: Nitro Duck 68/45 Preset
Consistency: dunno yet
Efficiency: around a case a fill
Prefered barrel: using hammerhead now
Any problems: none
Comments: omg this gun is a friggin machine gun

[B#@V3R]

Serial number : #A00768
Board Type: WAS EQ Board
Milling Style: Black Unmilled
Date recieved : August 6th/2003
Approx num of shots: 30,000
Rof: (dry fire max 30) walking (18)
Lpr pressure: factory stock
Feed tube : DBN No-rise / CCM Clamping Low-Rise
Pinches per hopper: 0
Chops: 0
Breaks: a couple (bad paint)
Loader: Halo B w/ Rip Drive
Air system: 68/4500 PMI Preset
Consistency: +3/-3
Efficiency: 1800 approx
Prefered barrel: Dye Boomstick 14"
Any problems: Pin on bolt came up during play (fixed by by tighting it)
Comments: Awesome marker, I also use a JMJ Razor trigger, have wicked eye, JMJ eye covers, fast and she shoots darts!

[Froth]

Serial number : #A00388
Board Type: WAS EQ
Milling Style: 1/2 Milled - Custom Anodized.
Date recieved : 8/02/03
Approx num of shots: 15,000
Rof: 13bps(stock)
Lpr pressure: 80
Feed tube : Stock Low
Pinches per hopper: None
Chops: None
Breaks: None
Loader: Halo B
Air system: Crossfire 72/45 HP
Consistency: +/- 3
Efficiency: 1700 shots per fill(4.1k)
Prefered barrel: JT Two Piece 14"
Any problems: Faulty eyes, no others.
Comments: Great gun, sickly fast and just all out...well, nearly perfect.

[Killabot]

Serial number : #A01000
Board Type: WAS
Milling Style: none
Date recieved : 8/19/03
Approx num of shots: 4000
Rof: 13
Lpr pressure: 80
Feed tube : low rise
Pinches per hopper: none
Chops: Two, hopper went down
Breaks: none
Loader: Halo B
Air system: 45/45 Crossfire
Consistency: +/- 2
Efficiency: around 1000 shots
Prefered barrel: Hammerhead Fin system
Any problems: little leak out valve cap fixed in two secs.
Comments: Love this gun probably never switch again.

[serf]

Serial number : 872
Board Type: Morlock w/ eyes
Milling Style: Unmilled
Annodizing: Scratched Black type 3
Date recieved : 06/03
Approx num of shots: 40,000
Rof: 29
Lpr pressure: 90
Feed tube : Stock
Pinches per hopper: none
Chops: none
Breaks: none
Solenoid: Humphries
Loader: Halo B
Air system: System-X 68/45
Consistency: +/- 5
Efficiency: 2200 shots
Prefered barrel: Javelin
Any problems: WAS Equalizer fried! Can't get out of tounament mode. WAS won't replace.
Comments: When God plays paintball, she uses a Viking!

[Juhlén]

Serial number : 383
Board Type:Nelson
Milling Style: Black half milled
Date recieved : 07-03
Approx num of shots: 25,000
Rof: 17.6
Lpr pressure: 65
Feed tube : Stock high rise
Pinches per hopper: Duno
Chops: A few
Breaks: Barrel breaks du to bad paint.
Loader: Evo
Air system: 68/30
Consistency: +/- 2
Efficiency: 1050 shots
Prefered barrel: OTP
Any problems: None
Comments: Great product, waiting for the WAS board and the eyes.

[BarleyPops]

Serial number : A00646
Board Type: WAS Equalizer with eyes/ Plexi-dip sprayed JMJ eye covers
Milling Style: None
Date recieved : 8/8/03
Approx num of shots: 15,000
Rof: Only limited by eyes, 22 bps in Bypass
Lpr pressure: 71
Feed tube : Stock (Low or Mid?)
Loader: HaloB
Air system: AA Apocalypse 68/45
Consistency: +- 4 fps
Efficiency: 1800?
Problems: The stock grips must be replaced. I spend too much on paint now.
Comments: The lpr was set to 72 (hpr is 170) from the factory! I tried many other settings down to 55, but 70-72 was the most consistant. It was fun shooting at 50 psi though!

[BeeRRunneR]

Serial number : 400 something
Board Type: Morlock
Milling Style: PBX Dark Diamond Dust
Date recieved : Aug 2002
Approx num of shots: tons
Rof: ?? (ACE installed)
Lpr pressure: stock
Feed tube : CCM No Rise
Pinches per hopper: 0
Chops: 0
Breaks: 1 / 4000
Loader: Halo B (TE)
Air system: "The Reg" 68/4500
Consistency: + - 4
Efficiency: 1800 +
Prefered barrel: Sceptor or CP (14 inch)
Any problems: none (excluding my tinkering)
Comments: fastest thing i have ever put paint through, this is the one gun that i wont ever get rid of !!

[CGN Cocker]

Serial number : #A01051
Board Type: Equalizer
Milling Style: Unmilled
Date recieved : July 2003
Approx num of shots: 500
Rof: 13 bps
Lpr pressure: stock
Feed tube : low
Pinches per hopper: none
Chops: 2
Breaks: 2
Loader: evo II
Air system: crossfire 68/3000
Consistency: +/- 3
Efficiency: over 1000
Prefered barrel: cp barrels
Any problems: my stupidity
Comments: i love it

[dln115]

Serial number :#1045
Board Type:Equalizer
Milling Style: Unmilled
Date recieved : 8/28/03
Approx num of shots: 4000
Rof: Limited by Hopper (eyes)
Lpr pressure: Stock till I break her in
Feed tube :ccm no-rise
Pinches per hopper:0
Chops:2
Breaks:0
Loader:Halo B
Air system:Centerflag 68/45
Consistency: haven't chrono'd yet
Efficiency: unsure still
Prefered barrel: Powerlyte Scepter
Any problems: not yet
Comments:Love it so far

[thhitman]

Serial number : #A00215
Board Type: WAS EQ
Milling Style: 1/2 Milled - blue (indigo)?.
Date recieved : 8/5/03
Approx num of shots: 10,000
Rof: eyes, unlimited
Lpr pressure: 80
Feed tube : Stock Low
Pinches per hopper: None
Chops: None
Breaks: None
Loader: Halo B TE
Air system: nitro duck 68\45
Consistency: +/- 8
Efficiency: 1800 shots per fill
Prefered barrel: scepter
Any problems: little inconsistent on the chrono
Comments: As fast as anything I have ever shot, love it so far

[truss]

Serial number : A00939
Board Type: WAS
Milling Style: Unmilled
Date recieved : Sept.9,2003
Approx num of shots: 250
Rof: Stock
Lpr pressure: Stock
Feed tube : CCM Lowrise
Pinches per hopper: 0
Chops: 0
Breaks: 1
Loader: Egg 2 with y board
Air system: Crossfire 88/45 lp phatty
Prefered barrel: Sceptor Kit
Consistency:
Efficiency:
Any problems: none yet
Comments: I got the dark viking and love it.the trigger is so light. without the upped rof(yet) the gun is still insane fast.

[mlk3454]

Serial number : 1022
Board Type: Equalizer
Milling Style: none
Date recieved : 08152003
Approx num of shots: 20k
Rof: 16
Lpr pressure: stock
Feed tube : stock low rise
Pinches per hopper: 0
Chops: 2
Breaks: 0
Loader: egg
Air system: 3A 88/45 and Centerflag 88/45
Consistency: +/- 6
Efficiency: too many shots for those tanks so I have to sell one and get a 68/45
Prefered barrel: Ultralite or freak system
Any problems: Ram busted about 10,000 shots and 2 weeks after I got it
Comments: awesome gun, best one I have ever owned, can't wait to get me an excal

[ProX9]

Serial number : A00546
Board Type: Equalizer™ and a.c.e
Milling Style: Half milled sapphire blue
Date recieved : July 2003
Approx num of shots: 10,000
Rof: unlimited
Lpr pressure: 75psi
Feed tube : Stock low rise
Pinches per hopper: 0
Chops: 4
Breaks: 1
Loader: Halo B with TE software
Air system: Crossfire 45/4500 high output
Consistency: +-2
Efficiency: 1000+ off a 68 ci 3k fill
Prefered barrel: My SS scepter kit
Any problems: Came with the wrong solenoid plug but that was quickly fixed by aka for free.
Comments: I love this gun, it shoots ropes of paint and never chops. Actually it has chopped a few times but thats because the halo chucks that last ball down the feed tube.

[Angel016]

Serial Number: A00585
Board type: Nelson
Milling Style: Half Milled Copperish Dust Color
Date recievedct. 2003
Approx num of shots:4,000
ROF:30.3
LPR Pressure:70
Feed tube:stock low rise
Pinches per hopper: 0
Chops:1
Breaks:1
Loader:Halo B
Air System: 68/4500 PE system
Consistancy-+2-2
Efficencey:2000 or more off a 68/4500
Prefered barrel: Dye or Freak
Any Problems: none what so ever
Comments: this gun rips, never shot any thing like it. aka user and fan for ever, vikings rule!!

[joey d]

Serial number : 835
Board Type: WAS
Milling Style: unmilled
Date recieved : 10/28/03
Approx num of shots: :shrug:
Rof: Unlimited
Lpr pressure: Stock
Feed tube : Low rise
Pinches per hopper: none
Chops: autococker?
Breaks: none
Loader: 12v revvy (soon to be halo)
Air system: 3A 68/45 Preset
Consistency: dunno yet
Efficiency: dunno yet
Prefered barrel: using stock
Any problems: ran outta air
Comments: omg this gun is a friggin machine gun

[Vapir]

Serial number : 681
Board Type: WAS
Milling Style: Featherlight
Date recieved : 10/26/03
Approx num of shots: 50k
Rof: Unlimited
Lpr pressure: 70psi
Feed tube : CCM No Rise
Pinches per hopper: none
Chops: a few before I got my eyes
Breaks:none
Loader: halo b
Air system: 68/45 Dynaflow @ 550 psi
Consistency: +/- 3
Efficiency: 1900 ish
Prefered barrel: .689 Stiffi
Any problems: none
Comments: With razorblade and eyes, this thing is scary fast.

[wolf13]

Serial number : 415
Board Type: WAS
Milling Style: crusader
Date recieved : oct 03
Approx num of shots: unknown, but not many when i got it
Rof: capped, no eyes
Lpr pressure: Stock
Feed tube : CCM No Rise
Pinches per hopper: none
Chops: a few due to hopper problems
Breaks:none
Loader: halo b
Air system: PE 88/4500's
Consistency: +/- 3
Efficiency: around a case a fill
Prefered barrel: scepter
Any problems: none
Comments: finally an electro i feel comfortable with

[CockersRl33t]

Serial number : 446
Board Type: WAS Equalizer
Milling Style: Unmilled
Date recieved : 8/03 (used)
Approx num of shots: 15k (with me)
Rof: Unlimited
Lpr pressure: 72
Feed tube : Low rise
Pinches per hopper: none
Chops: none
Breaks:none
Loader: halo b
Air system: Centerflag 68/45
Consistency: +- 4
Efficiency: about a case
Prefered barrel: scepter
Any problems: none
Comments: Got the WAS board now just a little bit better than before.

[Slosh]

Serial number : B 1602
Board Type: WAS
Milling Style: Unmilled Black
Date recieved : Dec. 5,2003
Approx num of shots: 2k
Rof: Unlimited
Lpr pressure: Stock
Feed tube : No Rider by Barts Parts
Pinches per hopper: none
Chops: none
Breaks:2 bad paint
Loader: halo b. revy w/x-board and jmj impeller
Air system: 68/4500 450psi output crossfire
Consistency: dunno yet
Efficiency: around a case a fill
Prefered barrel: smart parts freak kit
Any problems: none
Comments: man this gun rips, i just love the fell of it and how it handles

[1mpulse_guy]

Serial number : VK#B01811
Board Type: WAS W/EYES
Milling Style: Unmilled 04
Date recieved : 12/11/03
Approx num of shots: 0 balls
Rof: As fast as i can walk, untill i get an equalink cable.
Lpr pressure: SCM
Feed tube : Low rise (BP No Rider coming soon)
Pinches per hopper: none
Chops: what are they?
Breaks:none
Loader: halo b RED w/z code
Air system: Crossfire 68/3k
Consistency: dunno yet
Efficiency: dunno yet
Prefered barrel: stock javalin or a dye ul
Any problems: dunnot yet
Comments: Its beautiful.