[facingfear]

My rpm is leaking from the hose inside from each end of the barbs. the pressure is set at a little under 200psi. I just got the hose replaces but it still leaks from there? any ideas?

[sandlot1]

oil the orings

[facingfear]

the o-rings where?

[facingfear]

I just tried putting a couple of drops of oil through the gun but that didnt do anything.

[sandlot1]

take the metal hose off and try putting some plumbing tape on the fittings to help it seal.

[facingfear]

My rpm was leaking so i tried to unscrew the barb inside and it broke off. So i might aswell go and do the lpr mod. Does anybody have an extra Rpm volumizer that is already drilled and tapped to fit a lpr. If so, pm me. thanks.

[facingfear]

Originally Posted by sandlot1

take the metal hose off and try putting some plumbing tape on the fittings to help it seal.

I tried to unscrew the barb and it broke off. your were talking about putting the tape on the threads right?