[Eriik666]

Where can I find the manual for the inoviq 2.2 board?
Can't find it anywhere.

Besides, I wonder what is the lowest bps the board can be caped to?
Can I cap it to 10pbs?

And what do dip switch 1 do? the lights turns blue when I switch it..

[dj red dog]

Check this thread for more details:

http://www.pbnation.com/showthread.php?t=2774393


TO SUM IT ALL UP, ANY QUEST WITH AN INOVIQ BOARD/CHIP(green or black board) IN ORDER FOR YOUR GUN TO SHOOT LEGAL PSP MODE YOU MUST GET CHIP REVISION 1.9(green board) OR 2.5(black board). 1.8 and 2.4 DO NOT WORK PROPERLY.

Manuals can be located here:

http://www.inoviq.com/products/vx-family/vx-quest/

[Gailon]

Make sure you understand the difference between Board Version and Chip Flash Version

[Eriik666]

ah.. snap.

Could never find the v2.2 manual, but it seems like it was not very unlike the 2.3.. 14bps will not do : (

Thanx for your reply though
Still, what do dip switch 1 do?

[Eriik666]

Originally Posted by Gailon

Make sure you understand the difference between Board Version and Chip Flash Version

Ok, I see.. mixed it up a bit..

v2.2 is the board.

Is the 1.9 or 2.5 is the chip pictured at their page?
EDIT: I mean, does the older chips look like that too? Mine looks like the one pictured.

[Gailon]

AFAIK, you need the Flash version 2.5 to go down to 10bps. You can contact Inoviq to get an upgrade. To find your Flash verision, When you enter programming mode the LED will first blink blue then blink purple letting you know you are in programming mode. This also tells you what Flash version of the chip you have - two blue blinks and one purple blink indicates Flash version 2.1

[Eriik666]

Ok, thanks for yer help anyway.