[kazumatheshellbullet]

was looking on scenario dreams.com and found a t board that is usable for the rpm

i have a new style RPM and it does not look like it would fit or that i would have to do a major mod to get it to fit?

and secondly do i have to change out my wiring harness to be able to use the board or can i just plug it in?

need some help

cheap board but im not sure about it

[frogsaver]

it fits fine, and they send wiring for the things that dont fit.

[Damonwill]

Email me a pic of the stock board and I'll be able to tell if it will fit or if you need to use another board.

Damon

[kazumatheshellbullet]

here's the problem my trigger frame and gun body are locked together

the back trigger frame bolt is stripped so i can't remove it ( hence i cant get to any of the major wiring

[Damonwill]

Have you tried a stripped or broken screw extractor? You really need to be able to remove the grip.

[gunangel]

wrath boards are direct replacements iirc. pretty much any sear tripping, clapper noid board damon sells will fit, you kind of have to watch for capacitor sizes tho as the rpm frame is a bit tight for the larger capacitors.

take a file or small fine tooth saw and cut into the bolt so you can extract the bolt with a screw driver.

you don't need to replace the wiring for the board as you just unplug everything from the board, unscrew it, and replace the board.

[kazumatheshellbullet]

Okay that works

and i am havign my father bring home one of those grab'its so that i can remove that bolt so i can paintr the gun but now i ned to buy new hardware

[ghost0280]

If you don't care let everyone know how it works when you get it going. I was looking at getting one and am just wondering how well it works before I get it.

[sandlot1]

the board should just plug in if you have the new style rpm.