Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Closed Thread
 
Thread Tools
Old 06-13-2009, 02:10 AM #1
ShadowGuy
 
 
ShadowGuy's Avatar
 
Join Date: Jan 2004
Location: Texas
ShadowGuy is a Supporting Member
 has been a member for 10 years
Stacked Tube Viking

I have edited this first post to help those that find this thread.
We are building up differing versions of the Evil-M, a stacked tube version of the Viking that was never released by AKALMP.
Here are the current bits of important information if you want to follow along/mimic.

Body
Original Evil-M can be purchased from Destructive Customs or Logic Paintball. $200+
or
You can use a Merlin extrusion purchased from AirSoldierProducts.
$11.50

Ram/Valve/Hammer/Bolt/Screws
Can be pulled from a 2004 Viking
or
Purchased new from AKALMP




Solenoid
Humphrey HEA10A5-GL-101W
Purchased from AirSoldierProducts, comes with gasket.
$56

Trigger Frame
Will have to be built or modified from an existing frame.
Distance between screw holes is 5.25.
Known working frames are
G2 Frame by Blue Fork
Will have to have front screw hole extended and back hole opened slightly.


2006 Cyborg Frame
???

Detents/Eye Wires
Quad Detent kit from 2004 Viking, can be purchased from AKALMP or Destructive Customs.



LPR
Currently unavailable, but modifying similar designs are possible.

Vertical Adapter
Can be pulled from 2006 Cyborg, or autocockers using a layout of 3 holes with center screwed in.

Barrel is autococker threading, and feedneck is AKALMP/MacDev threading.

CAD Files (SpitleBug)
http://nickguyver.com/free/Evil_M_Rev.0.zip

Close to final pictures of mine...


http://nickguyver.com/images/paintba...g/img_3435.jpg


http://nickguyver.com/images/paintba...g/img_3436.jpg


http://nickguyver.com/images/paintba...g/img_3438.jpg

Last edited by ShadowGuy : 07-27-2009 at 07:07 PM.
ShadowGuy is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 06-13-2009, 02:13 AM #2
Ruler_Mark
Huzzah
 
Ruler_Mark's Avatar
 
Join Date: Jan 2003
Location: Gainesville, FL
 has been a member for 10 years
Ruler_Mark donated to help Peyton Trent
weee 2nd post..

edit, my evilMs...


TOP row: Revenge V2, Raw Revenge V2 LE
Bottum row: 04 DC Viking, EVM007, EVM01111, VLM custom pump

http://www.youtube.com/watch?v=eeAIM...e=channel_page



EVM007 Elia serial'ed
Finished:
http://www.pbnation.com/showthread.p...6#post60605066




EVM01111 AKA serial'ed **RUNNING!

unmilled evilM
DC lpr
cyborg vert asa
SST hpr
04 viking tornado valve and ram cartiage
Humphrey HEA10A5-GL-101W Solenoid, http://www.airsoldier.com/mm5/mercha...Code=SOLENOIDS
+little things
AKA prototype frame
UTB board
JMJ reverse trigger modded to fit




EVM017 Elia serial'ed Not pictured

Elia milled evilM body
DC lpr on order
cyborg vert asa
04 viking RT valve and ram cartiage
Humphrey HEA10A5-GL-101W Solenoid, http://www.airsoldier.com/mm5/mercha...Code=SOLENOIDS
Elia frame + ego board + ego trigger






__________________
AKALMP guru

Last edited by Ruler_Mark : 08-12-2009 at 12:27 AM.
Ruler_Mark is offline  
Old 06-13-2009, 02:15 AM #3
Shibbykins
This is bat country
 
Shibbykins's Avatar
 
Join Date: Jan 2005
Location: In combat boots
Shibbykins donated to help Peyton Trent
Shibbykins has achieved Level 2 in PbNation Pursuit
well lets rock
__________________
Always buying NES,SNES, N64 stuff. PM with what you have..even if just box's and manuals

I endorse without a doubt the wired eyes at
www.ANGELLASEREYES.com

"Originally posted by dr.strangelove: Having Shibby on the case is almost as good as having Bob on it. "
Shibbykins is offline  
Old 06-13-2009, 03:06 AM #4
ghettogunner
Simple.
 
ghettogunner's Avatar
 
Join Date: Dec 2006
Location: Alaska
refresh my memory , what board options are being used?
__________________
Ripper Pump
ghettogunner is offline  
Old 06-13-2009, 03:16 AM #5
Angel Killer
Stupendous Man!!!
 
Angel Killer's Avatar
 
Join Date: Oct 2001
Location: NW Represent
Angel Killer is a founding member
 has been a member for 10 years
Angel Killer plays in the APPA D4 division
sub
__________________

PB4L
Angel Killer is offline  
Old 06-13-2009, 03:27 AM #6
DeathOfAllThings
 
 
DeathOfAllThings's Avatar
 
Join Date: Apr 2005
DeathOfAllThings is a Supporting Member
Sigh, I remember when it seemed like me and 2 other guys were going to make one of these. 2000 posts later...
__________________
Long Live AKA.
My Merlin The Merlin Of Doom
My Viking JMJ FL Swirl
My Evil M Another Angle (Work In Progress)

My Midblocked MQ'd Pump
DeathOfAllThings is offline  
Old 06-13-2009, 03:33 AM #7
Shibbykins
This is bat country
 
Shibbykins's Avatar
 
Join Date: Jan 2005
Location: In combat boots
Shibbykins donated to help Peyton Trent
Shibbykins has achieved Level 2 in PbNation Pursuit
Quote:
Originally Posted by ghettogunner View Post
refresh my memory , what board options are being used?
06 cyborg boards, iirc someone was gonna DM one and some are milling frame for ego boards
__________________
Always buying NES,SNES, N64 stuff. PM with what you have..even if just box's and manuals

I endorse without a doubt the wired eyes at
www.ANGELLASEREYES.com

"Originally posted by dr.strangelove: Having Shibby on the case is almost as good as having Bob on it. "
Shibbykins is offline  
Old 06-13-2009, 04:26 AM #8
moodydoody
C-17
 
moodydoody's Avatar
 
Join Date: Feb 2001
moodydoody is a founding member
 has been a member for 10 years
nice, new thread.

Glad to see you guys getting your M's up and running

__________________
2003 3rd Gen V10 Ram 2500HD QC 4x4
2008 E90 BMW 328i <- Why did I give this to the wife?
My DD C-17 GLOBEMASTER III

USAF
Texas A&M Alum
FEEDBACK
moodydoody is offline  
Old 06-13-2009, 09:22 AM #9
bballryand316
Custom Projects are fun.
 
bballryand316's Avatar
 
Join Date: Oct 2005
Location: Worcester, MA
Are my only options for:

LPR
Valve
Hammer/Ram

available at Destructive Customs?

And does anywhere else have the noid in stock?
__________________
Feedback
bballryand316 is online now  
Old 06-13-2009, 09:36 AM #10
matt00iconoclast
Matt #4
 
matt00iconoclast's Avatar
 
Join Date: Dec 2008
Location: Land of Oz
Quote:
Originally Posted by bballryand316 View Post
Are my only options for:

LPR
Valve
Hammer/Ram

available at Destructive Customs?

And does anywhere else have the noid in stock?
you could go through Macdev for the LPR i don't remember the year

and the hammer and valve can all be gotten straight through AKA

the noid can be found in the B/S/T section takes a little digging but they are there
matt00iconoclast is offline  
Old 06-13-2009, 10:18 AM #11
killerWGP212
Matrix Connoisseur
 
killerWGP212's Avatar
 
Join Date: Nov 2005
Location: i wish i knew this
hooray new thread


Im still working out milling on mine
__________________
"An elegant weapon; From a more civilized age."

Highlights of my collection: Tequila Sunrise Matrix, Revenge V3, Highlander Viking, Eclipse Cocker, E-Mag
~My Old Feedback~
killerWGP212 is offline  
Old 06-13-2009, 10:22 AM #12
matt00iconoclast
Matt #4
 
matt00iconoclast's Avatar
 
Join Date: Dec 2008
Location: Land of Oz
this might have been covered but what program should i use for milling design and is there any free ware of it?
matt00iconoclast is offline  
Old 06-13-2009, 10:23 AM #13
lrgjme
 
 
Join Date: Dec 2004
06 borg lpr if you modify it, and a pmr ultralite frame modded, and a uni tboard. if someone could only teabag mod still, priceless, and the value would certainly double.
__________________
aka
Patrick Swayze
Beerpong
Nohomo
lrgjme is offline  
Old 06-13-2009, 10:28 AM #14
The Others (Banned)
Sandana Soldier
 
Join Date: Mar 2008
Location: Sandana USA
The Others supports Cereal Killerz 2
The Others donated to help Peyton Trent
The Others supports Bob Gurnsey
The Others supports our troops










Last edited by The Others : 06-13-2009 at 10:59 AM.
The Others is offline  
Old 06-13-2009, 10:52 AM #15
The Others (Banned)
Sandana Soldier
 
Join Date: Mar 2008
Location: Sandana USA
The Others supports Cereal Killerz 2
The Others donated to help Peyton Trent
The Others supports Bob Gurnsey
The Others supports our troops





Last edited by The Others : 06-13-2009 at 11:01 AM.
The Others is offline  
Old 06-13-2009, 11:33 AM #16
Shibbykins
This is bat country
 
Shibbykins's Avatar
 
Join Date: Jan 2005
Location: In combat boots
Shibbykins donated to help Peyton Trent
Shibbykins has achieved Level 2 in PbNation Pursuit


Evil M #1 im building
Tornado valve
04 viking ram assembly
Freestyle LPR with custom adapter (same one as last pic on post 14)
custom trigger
06 borg frame
06 borg asa
06 borg wiring
06 borg eyes
Sidewinder
DC lowrise
Noid

Works just need a bolt and eye covers now same with milling. Frame needs to be moved forward a bit and rear chopped.

Evil M#2
same as 1 but with DC LPR *still on order*
__________________
Always buying NES,SNES, N64 stuff. PM with what you have..even if just box's and manuals

I endorse without a doubt the wired eyes at
www.ANGELLASEREYES.com

"Originally posted by dr.strangelove: Having Shibby on the case is almost as good as having Bob on it. "

Last edited by Shibbykins : 06-13-2009 at 11:39 AM.
Shibbykins is offline  
Old 06-13-2009, 12:23 PM #17
MeuroM
 
 
MeuroM's Avatar
 
Join Date: Aug 2007
Location: Underground


EvilMorueM s/n#EMM001

-Custom simple body milling, 4oz lighter than the brick
-Custom trigger frame, takes AKA trigger style and MacDev boards, integrated beavertail
-Custom trigger
-Droid board with latest flash and electronics
-Humphrey HEA10A5-GL-101W solenoid with gasket
-Custom hammer cartridge, 03 style in 04 lenght, with shortened 03 hammer
-Tornado valve and spring
-SCM3 front part and guts with custom back part and integrated spring holder
-Viking 03 bolt shortened and pin
-Pre2k cocker vASA
-Sidewinder with custom short top
-Custom eyecovers
-Custom feedneck

I made the custom parts. That's my $299 EvilM project. Just not factoring in all the hours I've put in this 5 months project... Started early january, finished late may. It still needs anodizing, but it's completed and working. Shot 280fps +/-5 with 10months old paint. Hpr around 200psi, lpr around 70psi, dwell at 8ms.

Semi
http://www.youtube.com/watch?v=vEHQNhv7yJ4

PSP-12.5bps
http://www.youtube.com/watch?v=Uh97qYElbWc
__________________
I Make / For Sale:
-Viking/EvilM bolts
-EvilM LPR gauge tool


I am MorueM / Untouched Excal / Resurrected Swirl / Halfmill Retouched / The Family
MeuroM is offline  
Old 06-13-2009, 12:57 PM #18
ghettogunner
Simple.
 
ghettogunner's Avatar
 
Join Date: Dec 2006
Location: Alaska
all the small differences in each one are awesome , no two are exactly alike
__________________
Ripper Pump
ghettogunner is offline  
Old 06-13-2009, 12:59 PM #19
bballryand316
Custom Projects are fun.
 
bballryand316's Avatar
 
Join Date: Oct 2005
Location: Worcester, MA
Quote:
Originally Posted by matt00iconoclast View Post
you could go through Macdev for the LPR i don't remember the year

and the hammer and valve can all be gotten straight through AKA

the noid can be found in the B/S/T section takes a little digging but they are there
How much cheaper would this LPR be than the DC one?

Valve - Tornado recommended over the Robtown?

Noid - $85 shipped on here new, might wait for ASP to get more.
__________________
Feedback
bballryand316 is online now  
Old 06-13-2009, 01:18 PM #20
matt00iconoclast
Matt #4
 
matt00iconoclast's Avatar
 
Join Date: Dec 2008
Location: Land of Oz
Quote:
Originally Posted by bballryand316 View Post
How much cheaper would this LPR be than the DC one?
Borg ones are going for like 25 on ebay
DC ones were 92


Valve - Tornado recommended over the Robtown?
i have heard great things about both i do not know if this is absolute but the RT was a lot smoother and the tornado is more efficient
Noid - $85 shipped on here new, might wait for ASP to get more.you can find em used for like 30 or look on Icd-owners

IN BOLD
matt00iconoclast is offline  
Old 06-13-2009, 01:27 PM #21
bballryand316
Custom Projects are fun.
 
bballryand316's Avatar
 
Join Date: Oct 2005
Location: Worcester, MA
Quote:
Originally Posted by lrgjme View Post
06 borg lpr if you modify it, and a pmr ultralite frame modded, and a uni tboard. if someone could only teabag mod still, priceless, and the value would certainly double.
'Teabag' mod? I have a spare UL frame, I'm going to use that and get another Tboard.

What needs to be done for the 06 Borg LPR? I saw a few on ebay. I will pick one up, also going to get an ASA.

Quote:
Originally Posted by matt00iconoclast View Post

IN BOLD
Thanks. Found a few on there, different colors, but doesn't really matter as I will eventually get it anno'd. (LPR)

Going to look around for a noid as well.

Valves - Can any borg valves work? I liked my Red valve I used to have.
__________________
Feedback

Last edited by bballryand316 : 06-13-2009 at 01:29 PM.
bballryand316 is online now  
Closed Thread


Thread Tools

Posting Rules
Forum Jump