ok so today i cleaned my ion, as i was tightening the banjo fitting to the donut my gay little cousin runs up behind me and scares me. i accidently overtightend the banjo from the scare and the thread for the banjo came off and is now stuck in the donut. the kid got a smack in the head, but my next question is can i possibly in any way get the thread out of the donut? or will i have to replace the donut? anybody who had this experience your help is appreciated, thanks.
NL Ballerz ][ CBC ][ DXS Shooterz
92 % of PBnation would be dead if Hostile Kids said breathing wasn't agg. If you're in the 8% that would celebrate the mass suicide of the fanboys, put this in your sig.
You can remove it very easily either with a screw extractor (that can be purchased at your local hardware store), or you can wedge something in it like a small flat blade screw driver or a small allen wrench, then just unscrew it.