Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Thread Tools
Old 03-11-2009, 12:03 PM #1
Simon's Avatar
Join Date: Apr 2001
Location: NJ
Annual Supporting Member
Simon is a Mega Moderator
Simon works for a Paintball manufacturer
Simon is playing at Living Legends IX
Simon owns a Planet Eclipse Ego
Simon owns a Planet Eclipse CS1
Empire RF Transmitter Installation in a TM-7 Marker.

Empire RF Transmitter Installation in a TM-7 Marker.

• Make sure your marker is degassed and safe to work on.

• Apply tape onto the Empire RF transmitter as pictured. Try to leave the two LEDs uncovered.

• Separate the body shells per the markers manual.

• Disconnect the solenoid from the stock wiring harness.

• Attach the correct included harness (one pictured) into the TM-7 solenoid plug and then plug the solenoid into the other end as pictured.

• Plug the long white harness into the open connecter and then plug the RF transmitter into the white harness.

• Install the RF transmitter in the provided space on the right side shell as pictured and gently bend the antenna; so it’s pointing toward the loader. If the electrical tape does not hold the RF transmitter in place, use some double sided tape.

• Make sure all the wiring is contained within the shell, so nothing gets caught between the shells.

• Re-assemble marker following the markers instructions.

• Synchronize your gun with your loader as per the loader's manual.

• Test - Turn on your TM-7 with the eyes off and pull the trigger. Each time you pull the trigger, the loader will spin.

• Go play paintball!
Simon is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Old 04-22-2009, 03:14 PM #2
mark1975's Avatar
Join Date: Sep 2005
Location: NJ
 has been a member for 10 years
mark1975 works for a Paintball manufacturer
Need to add to Stickies!
mark1975 is offline   Reply With Quote

Thread Tools

Posting Rules
Forum Jump