turn the knob out a little. the lpr should just be high enough to cock the gun, then about 1/8-1/4 turn more to avoid dropoff.
if they're spiraling that bad the fps may be way high. make sure the ivg and reg are set right. try setting the ivg to where you can only see about 2 threads on the body, then just adjust the fps through the reg.
i turned the IVG backwards to loosen it up because it was turned in about 5- 6 threads were visble but when i did this i guess something happened it was firing (making everything move) but no air came out of the barrel, then are was leaking from the electronic the way thing. what did i do to it?
sounds sorta like you bumped the lpr...if its too high or too low it will leak.
although i dont know why it would start leaking down the barrel..you may need to re-adjust your inline pressure. it was set with a higher spring tension, and now with the lower tension the air pressure may be high enough to hold the valve shut.