[sam_Michaud]

Where can i pick up a double trigger frame for my 2k led?

[ShawsAngel]

I believe warped sportz aces angels for $250?

[paintballkid094]

what can i do to make my angel less of an air hog?? im only getting 500 shots off a 68/3000 tank

[AncientSpear]

i'm no expert (ok, ok, i'm a n00b with angels) but you're dwell might be cranked WAY too high resulting in an angel that uses tons of air. try turning it down somewhat and see fi that helps (as long as your not breaking paint that is)

i'm currently getting 400-500 shots per 1000psi dependign on temperature (it's damn cold up here )

[FAice]

SO??? wich is the best for all of you??

LED, LCD, IR3, SPEED, and A4

im going to buy a LCD maybe.... but the IR3 its fine too

[*Leb*]

Uh... newer technology is better.. FLY has eyes... faster on all models... more effecient..

[El Presidente]

dumb question...are angels high maintenance?

[eric is cool]

This is gonna sound really noob. But i am extremely new to angels and was wondering how u adjust the velocity on an angel lcd?

[El Presidente]

answer mine first

[spunkey]

Originally posted by El Presidente
dumb question...are angels high maintenance?

no

[eric is cool]

nvm i found out how

[xwiredx]

I'm going to be getting a Fly soon. I was wondering if the maintenance procedures in the first couple posts would be good for this model as well? Or have things changed? Also, instead of KC trouble free, can I use Gold Cup oil and White Lithium Grease?

[Hornet]

i wouldnt put 2nd rate products in my top-of-the-line gun...........but thats just me


angels are one of the lowest maintance guns.....

10k shots = few drops of oil in ASA

20k shots = Grease ram and few drops of oil in ASA

[nicky1.8t]

what kind of grease should you use? and do you need the angel toos to take the ram out

[mental_inhailant]

how can i get ahold of warped in la to have put on a 2k1 lcd? can they put in like a frenzy/was board too? i have the board just need install and eyes....

[RunThru]

does anyone know the right way to put the hammer and ram back in?

[xxxchris03xxx]

hey i'm having some problem with my range on my 01' LCD dark, its dropping off too. what can i do to help?

[skeletar]

Originally posted by RunThru
does anyone know the right way to put the hammer and ram back in?

Put a fair amount of grease on the ram o-rings, on the body threads, and a little in the body. Slowly slide it in, steady and straight as you can, and then once it stops, turn it clockwise until the ram is properly adjusted: When the bolt pin is resting on the back of the hammer, and when you close the breech you hear a "click."

[El Presidente]

do you have to use angel air on an angel?

[AncientSpear]

no you don't

[El Presidente]

thanks spear and spunkey