Originally Posted by shocker4life03
I tried it in mine just to see if it worked and when i pulled the trigger to sync it it just turned the gun off... Will that be fixed with the new update or is that a greater problem?
Is your battery level okay?
Are you plugged into the auxiliary port?
If the answer to both these questions is yes then it sounds like you have a short circuit somewhere. Try the following -
Unplug the lead from the auxiliary connector. Does this fix the problem?
If not then you have a board problem. Check the auxiliary socket for anything that could cause a short. If nothing is obvious then contact gerry at planeteclipse dot com who will arrange a replacement board.
If so then remove the transmitter from the lead and plug the lead back into the board. Does the problem return?
If so then the short circuit is on the lead. Check the 2 lead plugs for anything that could cause a short. If nothing is obvious then contact gerry at planeteclipse dot com for a new lead.
If not then the problem is with the RF transmitter and you should contact the manufacturer.
Hope this helps.